4H4CEOM1.pdf - 第138页
Page 5-16 Supplying Chips during Production 4H4C-E-OMA05-A01-00 3 . Replace the tape feeder whose chips run out. • How to Replace “ 5-2 Setting T ape Feed- ers ” 4 . Close the safety cover , turn ON the servo switch. 5 .…
Page 5-14
Supplying Chips during Production
5-3-2 Tray Feeder Tables Motion in Supplying Chips
The tray feeder is divided in two (A and B), and the motion of the table varies according to the set
mode.
This part describes the motion of the tray feeder table in each mode.
∗ To check the mode, choose “Table mode select” from “Production config menu”.
( “3-2-2 Selecting Table Mode”)
Joint Mode
In this mode, the feeder is not divided.
Up to 40 types of chips can be used.
Spare Mode
In this mode, one of the divided feeder tables
is not used.
The chips for the next board type can be set
during production.
The chips on both
the tables are used
for the board A.
4H4C-E-OMA05-A01-01
4H4C-012E
For A
Board A
The chips for the
board B can be set
while the board A is
produced.
4H4C-013E
For A
Board A
For B
Page 5-15
5
SETTING PRODUCTION
MATERIALS
5
5-3-3 Supplying Chips to Tape Feeder
When a reel of the tape feeder empties, the machine comes to an immediate stop and the stage
light on the AF side turns on.
1. Check the address No. where the
chips run out, in the message area.
The address of the tape feeder whose chips
run out is displayed.
2. Turn OFF the servo switch, and open
the safety cover.
Supplying Chips during Production
4H4C-E-OMA05-A01-02
M55E
TURN OFF THE SERVO SWITCH BEFORE SETTING PRODUCTION TOOLS LIKE
TAPE FEEDERS.
You will have serious injury if the machine is actuated.
WARNING
OFF ( )
ON ( )
SERVO
To the next page
Page 5-16
Supplying Chips during Production
4H4C-E-OMA05-A01-00
3. Replace the tape feeder whose chips
run out.
• How to Replace “5-2 Setting Tape Feed-
ers”
4. Close the safety cover, turn ON the
servo switch.
5. Press
UNLOCK
→
START
on the operating
panel.
• Production resumes.
OFF ( )
ON ( )
SERVO
OFF ( )
ON ( )
SERVO
STOP
UNLOCK
STEP
START
LIGHT ON
SELECT
KEY LOCK
KEY LOCK
BACK LIGHT OFF
BACK LIGHT OFF
1
2
4H4C-019P