4H4CEOM1.pdf - 第43页
4 Page 41 4H4C-E-OMA00-A04-00 HOW T O SEE DESCRIPTION FOR OPERA TION The description depends on each page, but the basic structure is as follows. 1-1-1 Starting Production 1. Press Production . •“ Return to origin ” for …
Page 40
DISPOSING OF THE AIR SPRING
This machine uses the air spring to open/close covers. It is very dangerous to dispose of it as it is,
because high-pressure air is sealed into it. Before disposing of it, be sure to bleed it of the air.
Removing the air spring
Turn the bolt with hexagonal hole counterclockwise, and remove the spring.
Discharging of the air spring
Drill the spring and discharge the air in it completely.
NOTICE
As crashed chips and oil discharge when the air is coming out, use safety glasses
for protection.
1B4C-442E
1D4C-406E
4H4C-AB01
Bolt with hexagonal hole
Air spring
Position to drill the air spring
15 mm to 20 mm
Hole
Position to use the air spring
ABOUT DISPOSAL OF COMPONENTS CONTAINING MERCURY
NOTICE
This product has a fluorescent lamp that contains a small amount of mercury.
It also contains lead in some components. Disposal of these materials may be
regulated in your community due to environmental considerations.
For disposal or recycling information please contact your local authorities, or the
Electronics Industries Alliance.
4H4C-E-OMA00-A04-01
4
Page 41
4H4C-E-OMA00-A04-00
HOW TO SEE DESCRIPTION FOR OPERATION
The description depends on each page, but the basic structure is as follows.
1-1-1 Starting Production
1. Press
Production
.
•“Return to origin” for all axes are carried out.
MARKS USED IN THIS MANUAL
In this manual, the following mark are used for description.
Title
Actual operation
Supplementary description
Operation step number
: Shows operation flow.
: Shows a reference item.
: Shows the operation for engineers.
: Shows the operation for operators.
: Shows pressing a key on the touch
panel.
: Means pressing
UNLOCK
and then
START
on the operating panel within
2 seconds.
: Means pressing B key while
holding A key.
A B
+
Return
UNLOCK
START
Engineer
Operator
Page 42
NOTICE
This manual is created for CM301-D and CM301-DU. Therefore it mainly uses the
illustrations and screens of CM301-D for description.
HOW TO SEE DESCRIPTION FOR OPERATION
CE Specification
CM301-D
Front view
Rear view
Standard Specification
4H4C-AG00
4H4C-AH00
External view Specification
Front view
4M4C-AD00
Rear view
4M4C-AA00
DT40T-40
CM301-DU
Front view
Rear view
4X4C-AA00 4X4C-AB00
Front view
4M4C-AD00
Rear view
4M4C-AA00
DT40T-40U
∗ For further information about the specification, see “1-3 Equipment Specification” in the Operating Manual.
4H4C-E-OMA00-A04-00