4H4CEOM1.pdf - 第25页

Page 23 SAFETY PRECAUTIONS Be sure to observe CM301-D (Danger Labels) The following danger labels are pasted on this machine. Follow the instructions on each label. If a label has come off, put a new one on a proper posi…

100%1 / 138
Page 22
SAFETY PRECAUTIONS
Be sure to observe
CAUTION
BEFORE PERFORMING AUTOMATIC
WIDTH ADJUSTMENT, BE SURE TO
VERIFY NO BOARDS OR OTHER
OBJECTS ARE ON THE CONVEYOR.
Boards or other objects may drop from the con-
veyor, causing damage to the boards or the ma-
chine.
If there are any boards or other objects on the
conveyor, turn OFF the servo switch and remove
them.
M36E
4H4C-E-OMA00-A03-01
M39EB
CARRY OUT PERIODIC MAINTE-
NANCE AND INSPECTION.
If you fail to carry out periodic inspection and
maintenance, the machine cannot exhibit its true
performance or may break down.
Periodic inspection and maintenance should be
carried out by a trained person in charge of
maintenance according to the instructions in
MAINTENANCE MANUAL.
M20EB
DO NOT BLOCK OFF THE OUT-
LET OR INLET OF THE FAN.
The temperature inside the machine will rise and
the machine may act abnormally. And it may injure
you.
Do not block off the outlet or inlet of the fan.
Periodically clean the filters of the outlet and
inlet.
M44E
WEAR A PROTECTIVE HAT AND
GOGGLES FOR MAINTENANCE
WORK.
Your head or eyes may be injured while performing
maintenance work.
DO NOT DISAS-
SEMBLE THE CAM-
ERA UNIT.
You may be injured or the
machine may break down.
If a breakdown occurs,
consult the manufacturer.
M41EB
Page 23
SAFETY PRECAUTIONS
Be sure to observe
CM301-D (Danger Labels)
The following danger labels are pasted on this machine. Follow the instructions on each label. If a label has
come off, put a new one on a proper position. To order a label from the manufacturer, refer to PARTS LIST.
The positions of danger labels on the front side
M32E
4H4C-AA01
The labels for safety pasted on the product
The positions of danger labels on the rear side
4H4C-AB01
4H4C-E-OMA00-A03-01
Label part No.
Page 24
SAFETY PRECAUTIONS
Be sure to observe
4H4C-E-OMA00-A03-01
CM301-D (Warning Labels)
The following warning labels are pasted on this machine. Follow the instructions on each label. If a label has
come off, put a new one on a proper position. To order a label from the manufacturer, refer to PARTS LIST.
The positions of warning labels on the front side
The labels for safety pasted on the product
4H4C-AA01
Label part No.
Inside the front cover