4H4CEOM1.pdf - 第113页

Page 4-5 PRODUCTION 4 4-3 Starting Production NOTICE Before starting production, check the positions of emer- gency stop buttons and how to use them. ( SAFETY PRECAUTIONS ) • When this equipment is in abnormal condition,…

100%1 / 138
Page 4-4
Before Production
4-2-2 Checking Air Pressure
1. Remove the screw with a driver, and
open the cover at the lower side of
the rear operation area.
2. Make sure the pressure gauge
indications are within the following
ranges.
Main Body: 0.49 MPa or more
and 0.78 MPa or less
Tray Feeder: 0.30 MPa or more
and 0.35 MPa or less
∗ Make sure the lever is ON.
∗ If air pressure is improper, turn the valve
and adjust it.
1
Unlock the valve.
2
Adjust the air pressure.
3
Lock the valve.
Valve
Pressure Gauge
Lever
To turn it
ON, throw
it down.
4H4C-001P
ON
Front Side
4H4C-AN00
4H4C-E-OMA04-A01-00
4H4C-002P
3
Lock the valve.
2
Adjust the air pressure.
1
Unlock the valve.
Valve
Pressure Gauge
4H4C-017E
Page 4-5
PRODUCTION
4
4-3 Starting Production
NOTICE
Before starting production, check the positions of emer-
gency stop buttons and how to use them. ( SAFETY
PRECAUTIONS)
• When this equipment is in abnormal condition, press this
button immediately.
• Pulling the emergency stop button out resets it.
4-3-1 Starting up Machine
Start up the machine in the following order.
1. Turn ON the power supply switch.
• Power is supplied to the machine and the touch
panel starts to be displayed.
• The system starts loading to the machine. It
will take several minutes.
• After the system has been loaded, the screen
as shown left is displayed.
2. Turn ON the servo switch.
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
OFF ( )
ON ( )
SERVO
E
M
E
R
G
E
N
C
Y
S
T
O
P
4H4C-E-OMA04-A01-01
Page 4-6
4-3-2 Starting Operation
1. Press
Production
on the main menu.
2. Make sure the servo switch is ON,
then press
UNLOCK
→
START
.
• The steps from self-diagnosis ( 4-3-3) to
returning to origin ( 4-3-4) are performed.
After that, when a board is transported in from
the previous process, production starts.
OFF ( )
ON ( )
SERVO
STOP
UNLOCK
STEP
START
LIGHT ON
SELECT
KEY LOCK
KEY LOCK
BACK LIGHT OFF
BACK LIGHT OFF
1
2
Starting Production
4H4C-E-OMA04-A01-01