00193631-0602.pdf - 第10页

1 Preface Adjustment Instructions MTC 2 1.2 Overview of the issues 12/2007 Edition 10

Adjustment Instructions MTC 2 1 Preface

12/2007 Edition 1.2 Overview of the issues

1.2 Overview of the issues

NOTE

We would like to draw your attention to the fact that the contents of these adjustment instructions

are not part of a previous or existing agreement, commitment or legal relationship, nor is this

intended to modify one of the above. All obligations of the company ASM AS may be taken

from the appropriate sales contract, which also contains complete and valid warranty agreement.

These contractual warranty conditions are neither expanded nor restricted by the contents of

these adjustment instructions.

Guide Software version Issue

First edition Adjustment Instructions SR.504.xx 03/2003

corrected edition Adjustment Instructions 05/2004

corrected edition Adjustment Instructions 12/2004

corrected edition Adjustment Instructions 03/2007

corrected edition Adjustment Instructions 12/2007

1 Preface Adjustment Instructions MTC 2

1.2 Overview of the issues 12/2007 Edition

Adjustment Instructions MTC 2 2 Operational safety

12/2007 Edition

2 Operational safety

NOTE

It is absolutely necessary to observe the chapter 'Operational safety' of the MTC 2 User Manual!

WARNING

No activities may be performed on the MTC 2 without precise knowledge of the User Manual User

Manual/ User Manual. All tasks must be carried out by trained and qualified members of staff. All

warning, caution and danger notes must be adhered to!

DANGER

The SIPLACE station and the MTC 2 are operated electrically. Parts of the installation carry

dangerous levels of voltage – even when switched off at the main switch. Applicable national

standards such as VDE, VDI and VGB must be observed.

You should always switch the machine off at the main switch, and isolate it from the power supply

before carrying out work on live parts. There is a risk of death, severe injury and/or considerable

damage to equipment even if only one of these instructions are not followed.

Observe the relevant accident prevention standards and the User Manual for the installation. This is

applies particularly to the travel ranges of the lifting and feed axes of the MTC 2.