00193631-0602.pdf - 第41页
Adjustment Instr uctions MTC 2 4 Lifting axes 12/2007 Edition 4.2 Zero offset, refill position and transfer position 41 Gradually move th e lifting axis with or , until the bottom edge of cassette 2 is at the level of …
4 Lifting axes Adjustment Instructions MTC 2
4.2 Zero offset, refill position and transfer position 12/2007 Edition
40
4.2.6 Calibrating the refill positions
Check the zero offset (see section 4.2.2 "Checking the zero offset").
Select the Settings button from the menu bar at the bottom.
Select "Tower 1" and "Lifting axis".
Select "Teach refill position..."
Select "Cassette 2" and press "OK".
Adjustment Instructions MTC 2 4 Lifting axes
12/2007 Edition 4.2 Zero offset, refill position and transfer position
41
Gradually move the lifting axis with or , until the bottom edge of cassette 2 is
at the level of the tabletop and the cassette can be moved in and out without any problems.
NOTE
Every time you press the button or , the lifting axis moves up or down one step
of the selected step size.
Close the window with "Accept".
Repeat this calibration procedure for the other cassettes.
4 Lifting axes Adjustment Instructions MTC 2
4.2 Zero offset, refill position and transfer position 12/2007 Edition
42
4.2.7 Calibrating the transfer positions
Carry out the relevant preparatory measures (see section 4.2.1 "Preparatory measures").
Select the Settings button from the menu bar at the bottom.
Select "Tower 1" and "Lifting axis".
Select "Teach transfer position...".
Select "Cassette 1"and press "OK".