80S-20用户手册.pdf - 第117页

SIPLACE 80S-20/F4 User Manual 3 Introduction and basic concepts Software version SR.407.xx 01/2001 US Edition 117 3 Introduction and basic concept s This cha pter desc ribes the machine displays and co ntrols toge ther w…

2 Operational Safety SIPLACE 80S-20/F4 User Manual

2.8 ESD guidelines Software version SR.407.xx 01/2001 US Edition

116

Do not allow modules with chargeable and highly insulating materials to touch one another, e.g.

plastic films, insulating table surfaces or items of clothing made from synthetic fibers. 2

Always place the modules on a conductive surface (table with an ESD coating, conductive ESD

foam, ESD bag or container). 2

Do not bring modules near visual display units, monitors or televisions. Keep them at least 10 cm

away from the screen. 2

2.8.4 Measurements and modifications to ESD modules

Do not take measurements on such modules unless

Å the measuring device is earthed (e.g. via PE conductors) or

Å you discharge the measuring head just before taking measurements with a potential-free mea-

suring device (e.g. by touching an unpainted metal part of the controller casing).

Å Always use an earthed soldering iron if you carry out any soldering work.

2.8.5 Dispatching ESD modules

Å Always store modules and components in conductive packaging (e.g. metallized plastic bags

or metal sleeves) and dispatch them in conductive packaging.

If the packaging is not conductive, place the modules in a conductive envelope before pack-

aging. (Use ESD bags, domestic aluminum foil or paper, for example. NEVER use plastic bags

or film). 2

Å If the module has integral batteries, ensure that the conductive packaging does not touch or

short-circuit the battery terminals and, if necessary, first cover the terminals with insulating tape

or material.

SIPLACE 80S-20/F4 User Manual 3 Introduction and basic concepts

Software version SR.407.xx 01/2001 US Edition

117

3 Introduction and basic concepts

This chapter describes the machine displays and controls together with the components of the

graphic user interface.

It also provides a basic understanding of the use of the user interface and its functions. 3

NOTE

It is essential for operators who are not yet familiar with the user interface of the station computer

software (SC software) to read this chapter. 3

3 Introduction and basic concepts SIPLACE 80S-20/F4 User Manual

3.1 Machine displays and controls Software version SR.407.xx 01/2001 US Edition

118

3.1 Machine displays and controls

3.1.1 Overview

Fig. 3.1 - 1 Overview

Key to Fig. 3.1 - 1

(1) Monitor

(2) Keyboard

(3) Main power switch

(4) Front control panel

(5) Rear control panel

(6) Computer

(7) Main fault indicator