80S-20用户手册.pdf - 第188页
5 Single functions SIPLACE 80S-20 /F4 User Manual 5.2 Single functions, gantry Software version SR. 407.xx 01/2001 US E dition 188 5.2.4.1 Functions In the "V ac uum test" vie w only the "M easure" b …
SIPLACE 80S-20/F4 User Manual 5 Single functions
Software version SR.407.xx 01/2001 US Edition 5.2 Single functions, gantry
187
5.2.4 "Vacuum test" view
Å In the current view for the single functions for Gantry, click the symbol .
The user interface is switched to the "Vacuum test" view (see Fig. 5.2 - 4
).
5
5
Fig. 5.2 - 4 "Vacuum test" view (12-nozzle Collect&Place head)
5 Single functions SIPLACE 80S-20/F4 User Manual
5.2 Single functions, gantry Software version SR.407.xx 01/2001 US Edition
188
5.2.4.1 Functions
In the "Vacuum test" view only the "Measure" button is available. This is used to start the vacuum
test for all nozzles.
Measure 5
This function is used to start a head reference run. This measures the vacuum values in the open
and closed pick-up positions for each of the nozzles.
Å Click the Measure button.
The vacuum calculation procedure is started.
The calculated vacuum values for each of the nozzles are displayed in two columns, "Pick-up
open (mbar)" and "Pick-up closed (mbar)". You can use these values to see, for example,
whether a nozzle on a particular segment is dirty.
SIPLACE 80S-20/F4 User Manual 5 Single functions
Software version SR.407.xx 01/2001 US Edition 5.2 Single functions, gantry
189
5.2.5 "Nozzle offset" view
5
Å In the current view for the single functions for Gantry, click the symbol .
The user interface is switched to the "Nozzle offset" view (see Fig. 5.2 - 5
).
5
Fig. 5.2 - 5 "Nozzle offset" view (12-nozzle Collect&Place head)