80S-20用户手册.pdf - 第154页

4 Placement functions SIPLACE 80S-20 /F4 User Manual 4.1 Setup display Software version S R.407.xx 01/2001 US E dition 154 4.1.2.2 Manual input of the component barcodes Å Click on the Manual input butt on to enter th e …

100%1 / 570
SIPLACE 80S-20/F4 User Manual 4 Placement functions
Software version SR.407.xx 01/2001 US Edition 4.1 Setup display
153
4.1.2.1 Acceptable barcodes
The list of barcodes (max. of 6) that are known for the component in the selected track is displayed
with this function. 4
Å Click on the Acceptable barcodes button
The following selection box is opened.
4
Å Click on the Close button. The selection box is closed.
The barcode read in using the barcode reader is compared to the possible barcodes.
The positions hidden due to the filter (marked by a ¤) will not be used for the comparison.
The results of the barcode comparison will be displayed in the display field of the "Component
verification with barcode" window (see the following examples).
The barcodes match.
4
The barcodes do not match.
4
4 Placement functions SIPLACE 80S-20/F4 User Manual
4.1 Setup display Software version SR.407.xx 01/2001 US Edition
154
4.1.2.2 Manual input of the component barcodes
Å Click on the Manual input button to enter the barcode by hand.
The following input box is opened.
Å Enter the barcode in the input field and close the input box using OK.
The barcode comparison is started.
The results of the barcode comparison will be displayed in the display field of the "Component
verification with barcode" window (see Section 4.1.2.1
).
Å The further procedure is described in Section 4.1.2.1.
SIPLACE 80S-20/F4 User Manual 4 Placement functions
Software version SR.407.xx 01/2001 US Edition 4.1 Setup display
155
4.1.2.3 Refilling an empty track with "Refill track"
As soon as a feeder in an empty track has been refilled with components, this fact must be con-
firmed so that the placement head can access this track again. This is done with the help of the
"Refill track" function. 4
Procedure
Å The track barcode of the corresponding track is read in.
Å The component barcode of the corresponding component reel is read in.
The "Refill track" button is active when the barcodes match (see the following figure).
4
Fig. 4.1 - 3 "Component verification with barcode" window, matching barcodes
4
Å If the feeder in the current track is full, then click on the Refill track button to confirm this or
read in the return barcode on the barcode bar.
Å Close the window with Close.
4
4
4
4
4
4