80S-20用户手册.pdf - 第528页

11 Station extensions /Hardware SIPLACE 80S-20 /F4 User Manual 11.13 Vacuum t ooling Software version SR.407.x x 01/2001 US Edition 528 1 1.13 V acuum tooling V acuu m tooli ng is ano ther modu le that is used to i ncrea…

SIPLACE 80S-20/F4 User Manual 11 Station extensions /Hardware

Software version SR.407.xx 01/2001 US Edition 11.12 Fine calibration

527

The following parts may be ordered if required: 11

– Magazine with glass components for the collect&place head and pick&place head with flip-chip

vision module (article number 00343704-xx)

11.12.4 Functional description

First select the placement program for fine calibration by selecting the ‘Cluster for fine calibration’

option from the ‘Options’ pull-down menu. Then process the mapping plate with the glass compo-

nents from a magazine on the manual tray. 11

After placement, start the SITEST program and start the ‘Fine calibration’ measuring program.

The placement head (collect&place head or pick&place head) will measure the current placement

positions of the glass components and compare these positions with the circular fiducials on the

mapping plate. The results are used to calculate the offset values. 11

The offset values are used to determine corrected values, which are then entered in the machine’s

machine data. 11

11 Station extensions /Hardware SIPLACE 80S-20/F4 User Manual

11.13 Vacuum tooling Software version SR.407.xx 01/2001 US Edition

528

11.13 Vacuum tooling

Vacuum tooling is another module that is used to increase the placement accuracy for concave

PCBs. The vacuum surface of this device picks up concave PCBs during processing and aligns

them so they are flat. 11

The vacuum tooling module can be used on both single and dual conveyors, and is fitted to the

lifting tables. 11

11.13.1 Description of the functions

The PCB is fed to the processing belt, where it is stopped. The lifting table moves up and the vac-

uum circuit for the vacuum tooling device is opened. The PCB is then held in place by the vacuum

tooling device, which is pressed with a spring action against the PCB by the lifting table. This

causes the suction cups of the tooling device to press against the PCB and hold it firmly in position.11

The vacuum channels are vented after placement. The lifting table is lowered, the PCB is re-

leased, and can then be moved on. 11

SIPLACE 80S-20/F4 User Manual 12 Station extensions / software

Software version SR.407.xx 01/2001 US Edition 12.1 Remote support

529

12 Station extensions / software

12.1 Remote support

12.1.1 General comments

The "Remote Support" (Remote Service) option enables service personnel in Munich, Singapore

and Norcross to access system data on the line computer, station computer, machine controller

or a GEM computer, if there is one, on the customer’s SIPLACE line or SIPLACE station.

This allows the service engineers to localize and correct software and data problems in the cus-

tomer’s systems online. This feature also makes for better problem-oriented planning of any ser-

vice visits to the customer, thereby keeping servicing time to a minimum. 12

12.1.2 Safety information

DANGER

If movements of machine components are initiated at a customer’s machine via the "Remote

Support", a trained line engineer must be present at the machine. In addition, this line engineer

must be able to communicate by telephone with the engineer who is performing the "Remote

Support".

When performing these operations; it is essential to observe the general safety information pre-

sented in Chapter 2 of this User’s Manual. 12

12.1.2.1 Data security

The machine or system can only be accessed when this is specifically desired by the customer

and when he allows this to be done via the requisite communications PC (Router). 12

The service engineer will be working in a lockable room in the service center. Only authorized per-

sons will have access to this room. 12