80S-20用户手册.pdf - 第158页

4 Placement functions SIPLACE 80S-20 /F4 User Manual 4.2 Error display Software version SR. 407.xx 01/2001 US E dition 158 4.2.2 "T rack errors" view 4 Fig. 4.2 - 1 "T rack errors" view 4

SIPLACE 80S-20/F4 User Manual 4 Placement functions

Software version SR.407.xx 01/2001 US Edition 4.2 Error display

157

4.2.1 Functions

The following functions described below can be executed by selecting the corresponding buttons

in the views for the corresponding error type. 4

Delete all 4

All entries in the table for the error type currently displayed are deleted with this function. 4

Å Click on the Delete all button

The error table is emptied.

Error information 4

This starts a help system that displays information on the possible causes of error for the selected

error as well as corrective measures. 4

Å Select the entry in the table for the error for which you require additional information. The line

selected is highlighted in light blue in the table. The "Error information" button is now active

(see Fig. 4.2 - 1

, for example).

Å Click on the Error information button

The help system window is opened.

The further procedure is described in Chapter 8 "Error information".

Diagnostics 4

This starts the diagnostics system. You use this system to attempt to recognize the cause of the

current error and to correct this error together with the operator. 4

Å Select the entry in the table for the error for which you want to start the error diagnostics.

Å Click on the Diagnostics button.

The user interface switches to the Main view of the diagnostics system.

NOTE

The diagnostics system is not available in the current software version. 4

4 Placement functions SIPLACE 80S-20/F4 User Manual

4.2 Error display Software version SR.407.xx 01/2001 US Edition

158

4.2.2 "Track errors" view

Fig. 4.2 - 1 "Track errors" view

SIPLACE 80S-20/F4 User Manual 4 Placement functions

Software version SR.407.xx 01/2001 US Edition 4.2 Error display

159

4.2.2.1 Meaning of the entries in the table for "Track errors"

– No

The error number of the corresponding error is entered in this column.

– CmpName

The name of the component for which the error has occurred is entered here.

– Loc.

The number of the location for which the corresponding component is set up is entered in this

column.

– Tr D T

The number of the track and of the feeder division for the corresponding component or the

number of the waffle pack tray compartment and the level in the waffle pack changer is entered

here.

– Seg

The number of the segment that was used to insert the component is entered here.

– #E

This column displays how often the corresponding error has occurred until now.

– Text

The error that has occurred is described in this column.