80S-20用户手册.pdf - 第28页
1 Introduction SIPLACE 80S-20 /F4 User Manual 1.4 Revision index Software version S R.407.xx 01/2001 US E dition 28 1.4 Rev ision index Firs t vers ion User ’ s Manu al SIPLAC E 80S-20/F 4 Edit ion 1 1/95 Basic version U…
SIPLACE 80S-20/F4 User Manual 1 Introduction
Software version SR.407.xx 01/2001 US Edition 1.3 User classification
27
The service engineer 1
This class is reserved for Siemens engineers, who are trained to carry out servicing work, and to
upgrade and retrofit the placement machine. 1
WARNING
A thorough knowledge of the relevant part of this User Manual is required before carrying out any
work on the machine. All work must be carried out only by appropriately trained and qualified per-
sonnel. All warning, caution and danger notes MUST be observed. 1
PLEASE NOTE: The content of this User Manual is not part of or intended to modify a previous
or existing agreement, undertaking, or legal relationship. Any undertakings entered into by Sie-
mens AG result from the purchase contract, which also contains complete and generally applica-
ble guarantees. Such contractual guarantee provisions are neither extended nor restricted by the
information given in this User Manual. 1
1 Introduction SIPLACE 80S-20/F4 User Manual
1.4 Revision index Software version SR.407.xx 01/2001 US Edition
28
1.4 Revision index
First version User’s Manual SIPLACE 80S-20/F
4
Edition 11/95
Basic version User’s Manual SIPLACE 80S-20/F
4
Edition 01/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Edition 03/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Edition 06/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Edition 03/97
Revision of User’s Manual SIPLACE 80S-20/F
4
/F
4
-6 Edition 07/97
Revision of User’s Manual SIPLACE 80S-20/F
4
/F
4
-6/F
5
Edition 03/98
Revision of User’s Manual SIPLACE 80S-20/F
4
/F
5
Edition 05/99
Revision of User’s Manual SIPLACE 80S-20/F
4
, SR.406.xx Edition 02/00
Revision of User’s Manual SIPLACE 80S-20/F
4
, SR.407.xx Edition 01/2001 US
1.4.1 Survey of the revisions in the 03/96 edition
1.4.2 Survey of the revisions in the 06/96 edition
Revised functions Chapters / Sections affected
Nozzle, type 412, for flip chips 11.5; 17.2
Nozzle contour diagrams 17.1
Overview of nozzles 17.2
PCB barcode configured for COM 2 11.3
Maintenance of gantry / Collect&Place head / IC head 9
Maintenance schedules 9
Setting the components illumination at the Collect&Place
head camera
7.6.5
New functions Chapters / Sections affected
Multiple Bar code 5.4.2
Twin conveyor 6; 11(so far only the software has been imple-
mented)
Fluxing 11.7
Remote Service 11.8
GEM Interface 11.9
On-line help expansions 4
SIPLACE 80S-20/F4 User Manual 1 Introduction
Software version SR.407.xx 01/2001 US Edition 1.4 Revision index
29
1.4.3 Survey of the revisions in the 03/97 edition
1.4.4 Overview of the revisions in the 07/97 edition
Diagnostics 19.2
Conveyor limit stop right / left LC UNIX User’s Manual
New functions Chapters / Sections affected
Revised functions Chapters / Sections affected
Notes on Touch Screen 2
Vision systems 7
Maintenance schedules 9
Maintenance of gantry / Collect&Place head / IC head 9
Revised functions Chapters / Sections affected
Maintenance of empty tape cutter 9.1.4; / 9.2; / 9.3.4
Maintenance of components table 9.1.4; / 9.2; / 9.3.3
Maintenance of Collect&Place head 9.1.4; / 9.2; / 9.5.6 Vacuum/
Forced air valves
New functions Affected Chapter / Section
6-nozzle Collect&Place head (all functions) 0; 2; 3; 4; 5; 9; 17
Cover guard on input / output belt 1.2
Display PCB barcode 2; 3; 11
Starting SITEST from user interface
(operation and the range of functions are described in a
separate manual)
2.4.3
Omitting components 3
Approaching the set-up position 4.2.1; 4.3.1
Guidelines for describing case shapes 5.7
What needs to be done...? New chapter 6