80S-20用户手册.pdf - 第203页

SIPLACE 80S -20/F4 User Manual 5 Single functions Software version SR.407.xx 01/2001 US Edition 5.2 Single functions, gantry 203 5.2.9.1 General comment s The "Flux ing" view pr ovides th e fluxing fu nctions d…

5 Single functions SIPLACE 80S-20/F4 User Manual

5.2 Single functions, gantry Software version SR.407.xx 01/2001 US Edition

202

5.2.9 "Fluxing" view

Å In the current view for the single function for Gantry, click the symbol .

The user interface is switched to the "Fluxing" view (see Fig. 5.2 - 9

). 5

NOTE

The "Fluxing" option must be installed and configured in the machine options before the func-

tions in this view can be executed. 5

Fig. 5.2 - 9 "Fluxing" view

SIPLACE 80S-20/F4 User Manual 5 Single functions

Software version SR.407.xx 01/2001 US Edition 5.2 Single functions, gantry

203

5.2.9.1 General comments

The "Fluxing" view provides the fluxing functions described below. Click on the appropriate button

to carry out the required function. 5

Go to refill position 5

This function moves the fluxer head to the refill position. It is only possible to refill the flux storage

tank or replace the flux nozzle in this position. 5

Å Click on the Go to refill position button.

The fluxer head moves to the refill position.

Rinse fluxer head 5

This function allows you to rinse the piping system of the fluxer head as required in order to re-

move trapped air or flux residue. This can, for instance, be necessary after changing the flux stor-

age tank or when no flux has been applied for some time. 5

NOTE

The flux parameter "No. of rinse cycles" can be used to set how many rinse operations will be car-

ried out (see Chapter 11 Station extensions /Hardware). 5

Å Click on the Rinse fluxer head button.

First the flux nozzle is cleaned on the brush and then the piping system of the fluxer head is

rinsed.

Init. fluxer head 5

This function starts a reference run of the fluxer head. The valve and lifting axis are moved to the

home position. 5

Å Click on the Init. fluxer head button.

The reference run is carried out.

5 Single functions SIPLACE 80S-20/F4 User Manual

5.3 Single functions, transport Software version SR.407.xx 01/2001 US Edition

204

5.3 Single functions, transport

NOTE

The travel functions of the x or y axis can only be carried out when the machine cover is closed.

To execute this function, press the start button.

As a rule, the gantries only travel slowly. The Collect&Place head is set to travel slowly. 5

Å On the tool bar in the main view, click the symbol which represents the transport you want to

test the functions of (or select the corresponding menu item from the "View" menu, e.g. "Trans-

port 1" for Transport 1).

NOTE

When dual transport is installed and available in the machine configuration, the single func-

tions can be called for either the right-hand transport (Transport 1) or the left-hand transport

(Transport 2). The functions are identical for both right and left. The symbols used to call the

single functions are marked with the number which corresponds to the transport side.

Example for Transport 1 (= right-hand transport or single transport). 5

The user interface is switched to the "Transport functions" view of the selected transport (see

Fig. 5.3 - 1

). 5