80S-20用户手册.pdf - 第94页
2 Operational Safety SIPLACE 80S-20 /F4 User Manual 2.1 Safety instru ctions Software version S R.407.xx 01/2001 US E dition 94 2 Fig. 2.1 - 16 T wo-handed operat ion (1) T wo-hande d operati on 2
SIPLACE 80S-20/F4 User Manual 2 Operational Safety
Software version SR.407.xx 01/2001 US Edition 2.1 Safety instructions
93
Key to Fig. 2.1 - 15
(1) Recessed grips for opening and closing the protective
(2) Protective cover
(3) Monitor traverse
(4) Narrow gap (between 4 and 10 mm) between
the monitor traverse and protective cover
(5) Do NOT place your hand on this surface!
Every protective cover on the automatic placement machine has two recessed grips (1). 2
PLEASE NOTE
Always place both hands in these recessed grips (see item (1) in Fig. 2.1 - 16
) in order to open
or close the protective covers. This “two-handed operation” will prevent any risk of injuring your
hands.
You will also avoid tilting the protective covers during opening or closing, which would place an
excessive load on the guides. 2
2 Operational Safety SIPLACE 80S-20/F4 User Manual
2.1 Safety instructions Software version SR.407.xx 01/2001 US Edition
94
2
Fig. 2.1 - 16 Two-handed operation
(1) Two-handed operation
2
SIPLACE 80S-20/F4 User Manual 2 Operational Safety
Software version SR.407.xx 01/2001 US Edition 2.1 Safety instructions
95
2.1.14 Securing the placement machine to prevent it slipping
In areas with an earthquake risk, it is essential to secure the placement machine to prevent it slip-
ping. 2
Two holes for M8 bolts are provided in the machine feet for this purpose. 2
Å Use the bolts to fix the placement machine to the floor as shown in the diagram below.
Fig. 2.1 - 17 Securing the placement machine to prevent it slipping
2