80S-20用户手册.pdf - 第81页

SIPLACE 80S -20/F4 User Manual 2 Operational Safety Software version SR.407.xx 01/2001 US Edition 2.1 Safety instructions 81 Item 6 in Fig . 2.1 - 2 on page 73 showin g the war ning si gns on the basic m achine - NA FT A…

100%1 / 570
2 Operational Safety SIPLACE 80S-20/F4 User Manual
2.1 Safety instructions Software version SR.407.xx 01/2001 US Edition
80
2
2
2
2
2
2
2
2
Item 4 in Fig. 2.1 - 4
showing the warning
signs on the basic machine - NAFTA region 2
2
2
2
2
2
2
2
2
2
2
2
Item 5 in Fig. 2.1 - 4
showing the warning signs on the basic
machine - NAFTA region - visible when the covers are open 2
Warning
High voltage can cause
severe
injury or death
Service in this area must be performed by
authorized personell only
Switch off main electrical and pneumatic
switches, remove from main power
Operating machinery
can
crush and mutilate limbs
Warning
Sliding covers
can crush or cut
SIPLACE 80S-20/F4 User Manual 2 Operational Safety
Software version SR.407.xx 01/2001 US Edition 2.1 Safety instructions
81
Item 6 in Fig. 2.1 - 2
on page 73 showing the warning signs on the basic machine - NAFTA region
Feeder label (enlarged)
DANGER 2
Use only feeders, labeled as shown above, when feeding capacitors based on metal-powder (e.g.
tantalum). 2
2
Use only approved feeders, labeled
as shown below, when feeding
capacitors based on metal-powder
(e.g. tantalum).
Fire Hazard
Can cause death, serious injury
or property damage
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
WARNING
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
2 Operational Safety SIPLACE 80S-20/F4 User Manual
2.1 Safety instructions Software version SR.407.xx 01/2001 US Edition
82
2.1.7 Safety instructions for the component vision modules (80F
4
)
DANGER 2
NEVER modify or bypass safety devices on the placement machine or on the fine pitch or flip chip
vision module. 2
The optical radiation from the fine pitch or flip chip vision module conforms to laser class 1, pro-
vided that the module is permanently installed in the placement machine and the protective hoods
are closed (EN 60825-1 and IEC 825). 2
Fig. 2.1 - 5 Identification of laser class 1
Class 1 Laser Product