80S-20用户手册.pdf - 第27页

SIPLACE 80S -20/F4 User Manual 1 Introduction Software version SR.407.xx 01/2001 US Edition 1. 3 User classification 27 The service en gineer 1 This clas s is reserve d for Sieme ns engineer s, who are trai ned to carry …

1 Introduction SIPLACE 80S-20/F4 User Manual

1.3 User classification Software version SR.407.xx 01/2001 US Edition

Error information and diagnosis 1

This chapter contains basic instructions on how to use the information provided by the error diag-

nostic system, which also enables you to enter and save your own notes on errors that have oc-

curred. The menu-driven diagnostic system is a valuable aid to troubleshooting and error analysis.1

Online help 1

This chapter explains how to use the online help system. 1

Component handling 1

In this chapter, you will find information concerning the feeders and the components they can be

used to insert. 1

Station extensions / hardware and software 1

Here you will find overviews of the nozzle changers, PCB barcode readers, Remote Service, etc.1

Software installation 1

This chapter tells you how to install the software. 1

1.3 User classification

The operating software is structured so that certain functions or menus can only be used or called

by appropriately trained personnel. There are three different classes of user: 1

– Operator

– Line engineer and

– Service engineer

Access to each class may be password-protected. Chapters containing information for user

classes higher than “operator” contain a reference to the user class concerned in the footer. 1

The operator 1

This user class consists of any person who has been trained to operate the machine. These peo-

ple are authorized to use any functions associated with operating the machine, and may call up

any menus needed to use the machine. 1

The line engineer 1

Line engineers have undergone special training, and are authorized to carry out line engineer ac-

tivities, such as creating set-up configurations, determining vision parameters, etc. 1

SIPLACE 80S-20/F4 User Manual 1 Introduction

Software version SR.407.xx 01/2001 US Edition 1.3 User classification

The service engineer 1

This class is reserved for Siemens engineers, who are trained to carry out servicing work, and to

upgrade and retrofit the placement machine. 1

WARNING

A thorough knowledge of the relevant part of this User Manual is required before carrying out any

work on the machine. All work must be carried out only by appropriately trained and qualified per-

sonnel. All warning, caution and danger notes MUST be observed. 1

PLEASE NOTE: The content of this User Manual is not part of or intended to modify a previous

or existing agreement, undertaking, or legal relationship. Any undertakings entered into by Sie-

mens AG result from the purchase contract, which also contains complete and generally applica-

ble guarantees. Such contractual guarantee provisions are neither extended nor restricted by the

information given in this User Manual. 1

1 Introduction SIPLACE 80S-20/F4 User Manual

1.4 Revision index Software version SR.407.xx 01/2001 US Edition

1.4 Revision index

First version User’s Manual SIPLACE 80S-20/F

Edition 11/95

Basic version User’s Manual SIPLACE 80S-20/F

Edition 01/96