80S-20用户手册.pdf - 第524页

11 Station extensions /Hardware SIPLACE 80S-20 /F4 User Manual 11.11 Feeder posit ion recognition Software version SR.407.xx 01/2001 US Edition 524 1 1 .1 1 Fe eder po sition rec ogniti on 1 1.1 1.1 General A feeder can …

SIPLACE 80S-20/F4 User Manual 11 Station extensions /Hardware

Software version SR.407.xx 01/2001 US Edition 11.10 PCB data transfer

523

11.10.2 Activating the PCB data transfer option

Å Click on the ‘Machine options’ button from the main view.

The ‘Machine options’ window will appear.

Å Select the ‘PCB data transfer’ option from the ‘Options’ box at the machine concerned.

Å Click on the ‘Accept’ button. The ‘PCB data transfer’ option is now active.

11 Station extensions /Hardware SIPLACE 80S-20/F4 User Manual

11.11 Feeder position recognition Software version SR.407.xx 01/2001 US Edition

524

11.11 Feeder position recognition

11.11.1 General

A feeder can be measured if it is equipped with position fiducials. 11

This function can also be used with the waffle tray holder (manual tray) if it has position fiducials. 11

If the ‘Feeder position recognition’ function is selected on the line computer, this function will ap-

pear in the machine options. 11

You can then activate or deactivate feeder position recognition at each station from the machine

options. 11

Fig. 11.11 - 1 Feeder position recognition

PLEASE NOTE:

The ‘feeder position recognition’ function is always inactive when the station is switched on. 11

SIPLACE 80S-20/F4 User Manual 11 Station extensions /Hardware

Software version SR.407.xx 01/2001 US Edition 11.11 Feeder position recognition

525

If the cluster data contains an entry for a track, the PCB camera on the feeder moves to the posi-

tion of the centering fiducial. Any centering fiducial offset determined by measurement is allocated

to this track, and added to the pick-up position during the pick-up process. 11

11.11.1.1 Restrictions

– Feeder position recognition cannot be used for WPC trays that are set up in the wafflepack

changer.

– Up to three fiducial positions can be defined for each feeder.

– Feeder fiducials on the right-hand side of the table (viewed in the transport direction) cannot

be measured on the 80F.

PLEASE NOTE:

This restriction does not apply to machines with a “sub-gantry camera”. 11

– If there is a feeder at location 118, and the fiducial position of the outer pick-up division is closer

to the X-axis travel range limit than the pick-up position, then the 8 mm S tape and bulk case

feeder cannot be scanned.