80S-20用户手册.pdf - 第52页

1 Introduction SIPLACE 80S-20 /F4 User Manual 1.11 Overview o f the modules - controls Software version SR.407.xx 01/2001 US Edition 52 1.1 1.3.1 Controls on the input and output conveyor sides of the machine The cont ro…

SIPLACE 80S-20/F4 User Manual 1 Introduction

Software version SR.407.xx 01/2001 US Edition 1.11 Overview of the modules - controls

the touchscreen can be used to enter data. The ultra-flat IBM-compatible PC keyboard incorpo-

rates a trackball for controlling the mouse. 1

Indicator lamp 1

The sequence of colors is white - green – white. This lamp is used to signal operating states and

malfunctions of the placement machine. 1

Component barcode reader 1

There is a compartment for a Datalogic DL 910 component barcode reader between the monitor

and keyboard. The barcode reader enables the components to be set up and topped up quickly

and reliably. 1

1.11.3 Ergonomic arrangement of the controls

Figure 1.11 - 1 on page 49 provides an overview of the position of the controls, which are subdi-

vided into the following groups: 1

Operating panel on the PCB input conveyor side with 1

– Start button

– Stop button

– Emergency stop mushroom-head push-button

– Main switch (on the left-hand side)

Operating panel on the PCB output conveyor side with 1

– Emergency stop mushroom-head push-button

– Start button

– Stop button

– Component counter

– Key switch

Console on the central cross-beam with 1

– Station computer

– Touchscreen monitor

– Keyboard and

– Component barcode reader (option)

1 Introduction SIPLACE 80S-20/F4 User Manual

1.11 Overview of the modules - controls Software version SR.407.xx 01/2001 US Edition

1.11.3.1 Controls on the input and output conveyor sides of the machine

The controls on the input and output conveyor sides of the machine are identical. 1

Emergency stop mushroom-head push-button, Start and Stop buttons 1

There is an emergency stop mushroom-head push-button, a Start button and a Stop button on

both the input and output conveyor sides of the PCB conveyor. This arrangement was adopted for

the emergency stop mushroom-head push-buttons because it enables them to be reached quickly

and easily from any position. 1

In addition, it is important to have an unrestricted view of the placement heads and placement area

during maintenance, servicing and setting up work in order to be able to check all the operations

carried out inside the machine. This particularly important during testing phases, or when starting

single functions, for example. 1

Key switch 1

The key switch is located on the operating panel on the PCB output conveyor. It is only needed

for setting up and servicing work so, for reasons of efficiency, it is positioned near the Start and

Stop buttons. 1

Main switch 1

The main switch is part of the power supply unit, so it is positioned on the left-hand side of the

PCB input conveyor. It is located here because it is only needed for servicing and maintenance

work and is therefore not subject to frequent use. 1

1.11.3.2 Controls on the machine console

Station computer, monitor and keyboard 1

The station computer, monitor and keyboard are all mounted on the console. They are arranged

so that any person who is at least 1.60 m tall can work comfortably and efficiently. 1

Component barcode reader 1

The two component tables for supplying components are arranged on the right and left of the ma-

chine. For this reason, the component barcode reader is also located in the central console, since

it enables the operators to work comfortably and efficiently during the set-up and refill check. 1

SIPLACE 80S-20/F4 User Manual 1 Introduction

Software version SR.407.xx 01/2001 US Edition 1.11 Overview of the modules - controls

1.11.4 Technical data – component barcode reader

Fig. 1.11 - 2 Component barcode reader

(1) Component barcode reader

Connected to Station computer

Data entry Via barcode scanner or keyboard

Number of characters Up to 40

Not permissible Barcodes starting with a 1 or 2

and less than 5 characters long

Number of barcodes Up to 6 per component

Filter for suppressing data Up to 1 per barcode

Preset code types Code 39 (standard or ASCII)

Code 2 of 5, interleaved and normal,

Code 128, UPC/EAN/JAN codes

(others available upon request)