80S-20用户手册.pdf - 第64页

1 Introduction SIPLACE 80S-20 /F4 User Manual 1.15 Overview o f the modules - PCB conveyor Software version S R.407.xx 01/2001 US E dition 64 The convey or belts are driven b y DC motor s. The lifting table near the cent…

SIPLACE 80S-20/F4 User Manual 1 Introduction

Software version SR.407.xx 01/2001 US Edition 1.15 Overview of the modules - PCB conveyor

1.15 Overview of the modules - PCB conveyor

1.15.1 Structure of the PCB conveyor

The machine is supplied with a single conveyor as standard. The dual conveyor is available as an

option. The left or the right side of the PCB conveyor can be used as the stationary side, as re-

quired. 1

Fig. 1.15 - 1 PCB conveyor - single conveyor

(1) Input conveyor (2) Center conveyor

(3) Output conveyor (4) Lifting table

(5) Width adjustment T PCB transport direction 1

1 Introduction SIPLACE 80S-20/F4 User Manual

1.15 Overview of the modules - PCB conveyor Software version SR.407.xx 01/2001 US Edition

The conveyor belts are driven by DC motors. The lifting table near the center conveyor clamps the

PCBs in position. The width of the PCB conveyor can be adjusted, either using the menu or from

the line computer. 1

1.15.2 Technical data – single conveyor

1.15.3 Technical data – dual conveyor

PCB format

50mm x 50mm to 460mm x 460mm

2" x 2" to 18" x 18"

Optionally: up to 508mm x 460mm

up to 20" x 18 "

PCB thickness 0.5mm to 4.5mm

Max. PCB warpage

On top: 4.5mm - PCB thickness

On bottom: 0.5mm + PCB thickness

Clearance on PCB underside 25mm (standard), 40mm (option)

PCB transport height

830mm ± 15mm (standard)

900mm ± 15mm (option)

930mm ± 15mm (option)

950mm ± 15mm (SMEMA: optional)

Fixed conveyor edge Right (standard), left (optional)

Type of interface Siemens (standard), (SMEMA: optional)

Component-free handling edge 3mm

PCB changeover time 2.5 s

PCB format

50mm x 50mm to 460mm x 216,5mm

2" x 2" to 18" x 8.5"

Optionally: up to 508mm x 216,5mm

up to 20" x 8.5 "