YG300_Ope_E.pdf - 第107页

3-21 3 Starting and ending pr oduction 4 . 7 F i d u c i a l T h e [ F i d u c i a l ] t a b s c r e e n s h o w s t h e r e c o g n i t i o n r e s u l t s o f f i d u c i a l m a r k s s u c h a s " B o a r d , B …

100%1 / 117
3-20
3
Starting and ending production
4.6 Retry
The [Retry] tab screen displays the history or the past 100 errors.
Monitor: Retry
24314-M3-00
3-21
3
Starting and ending production
4.7 Fiducial
The [Fiducial] tab screen shows the recognition results of fiducial marks such as "Board, Block", "2 Point Local"
and "Point" fiducial marks.
Monitor
Fiducial
24315-M3-00
• Align X, Y, R
Shows the difference between the recognition results and the board data input values, by plus or minus values.
• Align Ratio
Shows the rate of expansion of the board, calculated by using the X, Y and R offset values.
• Result
Shows the recognition results as a "Pass" or "Unfinished ". The "Unfinished" message changes to "Pass" after the mark has
been recognized successfully.
3-22
3
Starting and ending production
4.8 Badmark
The [Badmark] tab screen shows the recognition results of badmarks such as "Board, Block" and "Local"
badmarks.
Monitor
Badmark
24316-M3-00
• X, Y
Shows the board data input values (by taking block offset amount into account).
• Result
Makes an "OK" or "NG" decision based on the badmark recognition result.
OK : Work is performed when no badmark is recognized.
NG : Work is not performed when a badmark is recognized.