YG300_Ope_E.pdf - 第24页
xiv Safety instructions 3 . 2 . 2 M a c h i n e b r e a k d o w n o r d a m a g e n C a u t i o n i n s t r u c t i o n c CAUTION Do not touch the camera unit or apply impacts since this will adversely af fect component …
xiii
Safety instructions
n
Caution instruction
c
CAUTION
Looking directly into the laser beam may cause loss of eyesight.
n
Applicable machines IT option barcode reader
Possible loss of eyesight
93103-LC-00
n
Caution instruction
c
CAUTION
Do not blow ionized air into eyes. Do not disassemble ionizer and touch electrode needles.
n
Applicable machines Machines equipped with ionizer (option)
Do not blow ionized air into eyes
93104-LC-00
xiv
Safety instructions
3.2.2 Machine breakdown or damage
n
Caution instruction
c
CAUTION
Do not touch the camera unit or apply impacts since this will adversely affect component mounting operation.
n
Applicable machines All machines
DON'T
TOUCH
Do not touch camera unit
DO NOT TOUCH
93111-LC-00
n
Caution instruction
c
CAUTION
Remove the bolts for transport before use. Using the machine without removing the bolts may cause damage.
n
Applicable machines Feeder exchange carriage
Remove before use
93112-LC-00
n
Caution instruction
c
CAUTION
Wrong connections or wiring methods other than specified might damage the machine. Always make correct
connections by using specified wiring methods.
n
Applicable machines All machines
Make correct connections
93113-LC-00
xv
Safety instructions
n
Caution instruction
c
CAUTION
Using other than the specified solvents might damage the machine or create a fire hazard.
n
Applicable machines All solder printers
Use specified solvents only
93114-LC-00
n
Caution instruction
c
CAUTION
Before opening or closing the cover affixed with this label, first pull out the cleaning unit to avoid possible damage.
Reversing this order may damage the cover.
n
Applicable machines YVP-Xg
Caution when opening/closing the cover
93115-LC-00
n
Caution instruction
c
CAUTION
Do no apply excessive shock to the surface where this label is affixed. Doing so may cause damage or malfunction.
n
Applicable machines Machines equipped with CLi type feeder plate
Do not apply excessive shock
93116-LC-00