YG300_Ope_E.pdf - 第5页
About this manual The instructi on manual of this machine is written fo r those who o perate this machine. P l e a s e r e a d t h i s m a n u a l c a r e f u l l y f o r c o r r e c t o p e r a t i o n s a n d p a y spe…
Chapter 3 Starting and ending production
1. Starting production 3-1
1.1 Resuming operation from the stopped point 3-4
1.1.1 Loading the saved data 3-5
1.1.2 Editing mount flags 3-5
2. Ending production and turning power off 3-6
3. Modular error stop function 3-
8
4. Displaying the production monitors 3-1
1
4.1 Production 3-11
4.2 Main 3-1
3
4.3 Detail 3-1
5
4.4 Vision 3-1
7
4.5 Alignment 3-1
9
4.6 Retry 3-2
0
4.7 Fiducial 3-2
1
4.8 Badmark 3-2
2
4.9 Pick Pos. (Pickup position offset) 3-2
3
4.10 Pick Rate Warning 3-2
5
Appendix
A1. Specifications A-1
Index
About this manual
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
About this manual
Contents
1. Using this manual i
1.1 Available manuals i
1.2 Manual contents ii
2. Contents of each chapter iii
3. Page layout iv
i
About this manual
1. Using this manual
This manual is intended for machine operators, and mainly describes how to handle and operate YAMAHA
surface mounters and related equipment.
To use the machines safely and correctly, be sure to read this manual thoroughly before use.
c
CAUTION
Before using the machines, always read the "Safety instructions" in this manual and comply with instructions and rules
regarding safety.
1.1 Available manuals
There are several different manuals available including this manual to help users use the machine effectively
depending on their skills, expertise, and applications. Available manuals are shown below.
n
Available manuals
Manuals supplied with machine
Option manuals
The following manuals are supplied with
the optional equipment you purchased.
The following manuals are supplied with the machine you purchased.
The following manuals are not usually
supplied with machines and options.
These are available only to users who
receive our training (training fee required).
This manual
Operator's Manual
Programming Manual
Maintenance Manual
Maintenance Parts List
Tray Component Supply Unit User's Manual
Feeder User's Manual
Option Manual
Feeder Maintenance Manual
FAMF User's Manual
Maintenance Guide
23000-M0-00