YG300_Ope_E.pdf - 第25页

xv Safety instructions n C a u t i o n i n s t r u c t i o n c CAUTION Using other than the specified solvents might damage the machine or create a fire hazard. n A p p l i c a b l e m a c h i n e s A l l s o l d e r p r i…

100%1 / 117
3.2.2 Machine breakdown or damage
n
Caution instruction
c
CAUTION
Do not touch the camera unit or apply impacts since this will adversely affect component mounting operation.
n
Applicable machines All machines
DON'T
TOUCH
Do not touch camera unit
DO NOT TOUCH
93111-LC-00
n
Caution instruction
c
CAUTION
Remove the bolts for transport before use. Using the machine without removing the bolts may cause damage.
n
Applicable machines Feeder exchange carriage
Remove before use
93112-LC-00
n
Caution instruction
c
CAUTION
Wrong connections or wiring methods other than specified might damage the machine. Always make correct
connections by using specified wiring methods.
n
Applicable machines All machines
Make correct connections
93113-LC-00
xv
Safety instructions
n
Caution instruction
c
CAUTION
Using other than the specified solvents might damage the machine or create a fire hazard.
n
Applicable machines All solder printers
Use specified solvents only
93114-LC-00
n
Caution instruction
c
CAUTION
Before opening or closing the cover affixed with this label, first pull out the cleaning unit to avoid possible damage.
Reversing this order may damage the cover.
n
Applicable machines YVP-Xg
Caution when opening/closing the cover
93115-LC-00
n
Caution instruction
c
CAUTION
Do no apply excessive shock to the surface where this label is affixed. Doing so may cause damage or malfunction.
n
Applicable machines Machines equipped with CLi type feeder plate
Do not apply excessive shock
93116-LC-00
n
Caution instruction
c
CAUTION
Before operating the FD or USB memory drive to copy data, always close the media access cover to prevent dust from
adhering to the FD or USB port and to protect the floppy disk or USB memory device from electrostatic noise.
n
Applicable machines All YG series machines
Close cover before operating FDD or USB memory drive
93117-LC-00
n
Caution instruction
c
CAUTION
Use specified voltage to make correct connection. Using a connection voltage other than specified can damage the
machine or cause faulty operation.
n
Applicable machines All machines
AC208V INPUT
Use correct voltage
93118-LC-00