YG300_Ope_E.pdf - 第17页
vii Safety instructions 3 . Wa r n i n g l a b e l s a n d a t t a c h m e n t p o s i t i o n s T o u s e t h e YAM A H A m a c h i n e s s a f e l y a n d c o r r e c t l y , w a r n i n g l a b e l s a r e a t t a c h…
vi
Safety instructions
2.2.3 Facilities and environmental condition
When you see the following cautions or warnings, always read them thoroughly and make sure you fully
understand them.
w
WARNING
ALWAYS SHUT OFF THE POWER AND AIR SUPPLY BEFORE REPLACING PARTS OR PERFORMING REPAIRS.
w
WARNING
DURING TEACHING OR WHEN MAKING MACHINE ADJUSTMENTS, ALWAYS KEEP ALERT SO THAT YOU CAN STOP THE
MACHINE WHENEVER NEEDED.
w
WARNING
SAFETY DEVICES (SAFETY INTERLOCKS) THAT STOP MACHINE OPERATION SHOULD ALWAYS BE IN GOOD OPERATING
CONDITION.
w
WARNING
THE MACHINE SHOULD NEVER BE USED IN LOCATIONS WITH INFLAMMABLE GAS OR IN EXTREMELY DIRTY OR POLLUTED
ENVIRONMENTS.
vii
Safety instructions
3. Warning labels and attachment positions
To use the YAMAHA machines safely and correctly, warning labels are attached to the machine body and
peripheral equipment. Check that the information on each warning label is clearly legible and comply with
the instructions.
3.1 Warning labels
3.1.1 Handling of safety covers
n
Warning instruction
w
WARNING
KEEP THE SAFETY COVER CLOSED DURING MACHINE OPERATION. INJURIES MIGHT OCCUR FROM TOUCHING MOVING
PARTS DURING OPERATION WHILE THE SAFETY COVER IS STILL OPEN.
n
Applicable machines All Xg series and YG series machines, tray changer, etc.
Risk of injury
Safety cover
93001-LW-00
n
Warning instruction
w
WARNING
DO NOT TAMPER WITH THE SAFETY COVER SWITCH. INJURIES MIGHT OCCUR FROM TOUCHING MOVING PARTS DURING
OPERATION IF THIS SWITCH IS DEACTIVATED.
n
Applicable machines All Xg series and YG series machines, tray changer, etc.
WARNING
Do not touch this switch!
Machine movement may cause injury
Risk of injury
Safety cover switch
93002-LW-00
viii
Safety instructions
n
Warning instruction
w
WARNING
DO NOT TAMPER WITH THE SAFETY COVER SWITCH. INJURIES MIGHT OCCUR FROM TOUCHING MOVING PARTS DURING
OPERATION IF THIS SWITCH IS DEACTIVATED.
n
Applicable machines All Xg series and YG series machines, tray changer, etc.
Risk of injury
Safety cover switch
93003-LW-00