YG300_Ope_E.pdf - 第23页
xiii Safety instructions n C a u t i o n i n s t r u c t i o n c CAUTION Looking directly into the laser beam may cause loss of eyesight. n A p p l i c a b l e m a c h i n e s I T o p t i o n b a r c o d e r e a d e r Po…
xii
Safety instructions
3.2 Caution labels
3.2.1 Influence on human body
n
Caution instruction
c
CAUTION
Use caution since electrical shocks might occur from touching or coming in contact with the power supply section
inside the panel.
n
Applicable machines All machines
HIGH VOLTAGE!
Electrical shock hazard
93101-LC-00
n
Caution instruction
c
CAUTION
The motor becomes extremely hot during and shortly after operation, so do not touch it!
n
Applicable machines All machines
HOT!
Possible burns if touched
93102-LC-00
xiii
Safety instructions
n
Caution instruction
c
CAUTION
Looking directly into the laser beam may cause loss of eyesight.
n
Applicable machines IT option barcode reader
Possible loss of eyesight
93103-LC-00
n
Caution instruction
c
CAUTION
Do not blow ionized air into eyes. Do not disassemble ionizer and touch electrode needles.
n
Applicable machines Machines equipped with ionizer (option)
Do not blow ionized air into eyes
93104-LC-00
xiv
Safety instructions
3.2.2 Machine breakdown or damage
n
Caution instruction
c
CAUTION
Do not touch the camera unit or apply impacts since this will adversely affect component mounting operation.
n
Applicable machines All machines
DON'T
TOUCH
Do not touch camera unit
DO NOT TOUCH
93111-LC-00
n
Caution instruction
c
CAUTION
Remove the bolts for transport before use. Using the machine without removing the bolts may cause damage.
n
Applicable machines Feeder exchange carriage
Remove before use
93112-LC-00
n
Caution instruction
c
CAUTION
Wrong connections or wiring methods other than specified might damage the machine. Always make correct
connections by using specified wiring methods.
n
Applicable machines All machines
Make correct connections
93113-LC-00