KE-2050_2060_使用说明书.pdf - 第826页
索引 i-1 索引 【 A ～Ｚ】 2000 选项 ···································· 4-117 ATC ················································ 1-8 ATC 控制 ······································· 9-32 ATC 吸嘴的分配 ······························ 8…
附录 用语集
A-8
● 元件数据
用以上的贴片数据输入的“元件名称”，输入该元件的信息被称为元件数据。另外，还要设定元
件的形态、贴片该元件时的XYZ
θ的速度、各种检查、检查功能。
● 程序(生产程序)
在印刷配线基板上贴片电子元件的命令语言以及贴片位置数据的集合。
● 贴片头(设备)
将电子元件从元件供给部取出，贴片到印刷配线基板上的装置。
● 元件验证系统(CVS：Component Verification System)
验证是指在出厂时，测量元件的电容容量、电阻值、极性的选项。
生产时，仅测量该元件最初的一件，检查送料器设定是否错误。另外，也检查元件用尽后再运行
时的最初一件。
● 贴片机
向表面贴片元件的机器。将电子元件贴片到印刷基板上的指定位置的贴片机器。
● 机器坐标原点
机器坐标原点是指：当执行返回原点运行后，OCC摄像机进行CAL块上的第一标记的识别。识别结
束后，OCC摄像机从机器前部观察，向左前部移动，返回原点运行结束。此时的OCC摄像机位置是
坐标上的原点。即，变为(X=0，Y=0)的位置，以此为基础进行各坐标的展开。
返回原点时，OCC进行CAL块第一标记的识别，从原点到第一标记的距离由软件决定，可以明白相
对于该距离第一标记偏离设计尺寸多少。此时，XY标记的偏差和设计尺寸的差为偏移值，修正后，
返回原点坐标。该位置为正确的坐标原点。
● 基座(Land)
也叫底板。为了安装引脚或电极在基板上设置的焊接用基座。
● 引脚
元件端部安装的导电材料。元件安装时，焊接该部分以与基板结合。
索引
i-1
索引
【A～Ｚ】
2000选项 ····································4-117
ATC ················································1-8
ATC控制·······································9-32
ATC吸嘴的分配 ······························8-7
AWC·············································2-21
BOC标记位置 ···················· 4-15，4-19
BOC种类 ········································4-8
CAL块 ··········································3-16
CVS ··············································3-24
DTS控制 ·······································9-30
Emergency ··································1-40
Explorer·······································1-65
FMLA ·············································1-7
FPI··············································12-10
HLC连接·······································8-26
HMS ···········································12-12
HOD ···································1-37,4-145
HOD的使用方法··························4-145
IC回收带 ·····························8-17,12-16
LED ······································1-11,1-12
MNLA ·············································1-7
MTC/MTS/DTS ·····························4-64
MTC滑梭吸取位置 ························8-14
MTC自动示教 ·······························4-52
MTS标记识别································4-53
MTS的设置方法 ····························12-6
MTS控制·······································9-31
MTS装配位置偏差 ························8-15
OCC ·····································1-11,3-25
SOT方向检查··············· 2-73,4-66,9-36
UPS ······································1-15,3-34
UPS蓄电池 ···································3-34
VCS ······································1-12,3-16
VCS2值化阈值····························11-14
VCS的构造 ···································1-12
VCS聚焦高度······························4-101
VCS偏差·····································11-12
X,Y,Z,θ········································1-28
XY校正系数 ··································11-3
Z 项吸取偏移 ································4-51
【B】
帮助············································ 4-214
包装代码 ······································ 5-15
包装代码库··································· 13-9
保养················································ 3-1
背面高度 ······································ 4-16
边缘检查显示 ······························· 9-16
编号·············································· 4-73
编辑············································ 4-128
标记(标记ID)································· 4-30
标记识别 ········································ 4-9
标记识别错误 ······························· 2-96
标记数据库································· 4-211
不间断模式··································· 7-11
不间断运行································· 4-116
【C】
菜单的构成··································· 1-48
操作环境 ···································· 4-163
操作选项 ········································ 7-1
示教 ································ 7-2
生产(显示) ······················ 7-3
生产(功能) ······················ 7-4
生产(功能2) ···················· 7-6
生产(暂停) ······················ 7-7
生产(检查) ······················ 7-9
使用单元······················· 7-10
侧面照明 ···································· 4-103
测定·································· 4-169,4-175
查找···································· 4-131,5-23
厂商·············································· 5-30
程序编辑 ································ 1-49,4-5
程序名称 ······································ 1-64
尺寸设置 ································ 4-6,4-10
重命名 ·········································· 5-13
重试次数 ······································ 4-50
重试列表 ······································ 2-60
重新生产模式 ······························· 2-91
索引
i-2
传动部的构成 ································2-26
传送 ··································4-166,4-167
传送I/O状态 ··································2-50
传送带·············································3-9
传送轨道宽度的调整 ·····················2-21
传送滑轮 ·······································3-10
传送类···········································9-17
个别控制···················2-23,9-17
自动控制···························9-19
自动调整基板宽度控制 ·····9-21
元件吸取控制 ···················9-22
垂直照明 ·······································1-11
错误级别设置 ································10-8
【D】
打开 ······································1-62,2-17
打印 ··························· 1-67,4-213,5-34
打印机设定····································1-66
打印基板 ·······································1-20
带宽 ··············································4-40
单电路板 ·································4-7,4-11
单独验证 ··································· 2-66
单独检查 ·······································2-66
单位类·········································4-163
挡片 ··············································3-11
电路配置 ·································4-6,4-24
电路外形尺寸 ································4-19
电气规格 ·······································1-15
电气类···········································3-12
电源 ··············································1-15
定位方式 ·········································4-7
定位孔基准······································4-7
定位孔位置····································4-13
定心 ··············································4-49
定心方式 ·······································4-38
定心系统 ·······································1-23
定义数据格式 ··································6-4
读取吸嘴数据 ··································8-5
对象元件 ·······························1-16,4-78
多引脚元件······································6-1
多值识别 ·········································4-9
【E】
二值化识别····································· 4-9
【F】
反射照明 ···································· 4-103
范围检查 ······························ 4-26,4-34
非矩阵电路板 ························· 4-8,4-22
分层·············································· 4-33
分割识别 ···································· 4-100
分开（分割）贴片数据 ··············· 4-122
分配············································ 4-112
分配视野设置 ····························· 4-102
附加信息 ······································ 4-50
复合阵列元件 ································· 6-1
复制··································4-130，5-10
【G】
高分辩率摄像机···························· 1-12
个别控制 ······························ 2-23,9-17
各贴片头的运行信息····················· 10-9
各吸嘴的次数设置 ························ 10-5
各吸嘴运行信息···························· 10-4
跟踪球（轨迹球） ················ 1-39,3-26
更换次数设置 ····························· 10-10
工具······································ 2-52,5-25
供给·············································· 4-73
供给装置 ······························ 4-43,9-25
供给装置信息 ······························· 2-93
共线性 ········································ 12-25
管理············································ 4-211
过滤器元件····································· 3-2
【H】
画面的构成··································· 1-33
坏板标记传感器·························· 12-11
坏板标记传感器示教····················· 8-32
坏板标记类型 ································· 4-8
坏板标记位置 ······························· 4-20