Process Lens PL Service Manual_EN.pdf - 第133页
3 Replacing spare parts Se rv ic e Ma nu al P ro ce ss L en s PL - 0 3/ 20 25 13 3 Fig.190: TSP400 version number ► Check that the Version (1) of the circuit board is of number6 and above. See label. Installation Foll…
3 Replacing spare parts
132 Service Manual Process Lens PL - 03/2025
Fig.188: Switches
1. Switches
2. TSP400
► Check whether the switches on the circuit board are in the right "ON" or "OFF" position.
Number Position of the switch (ON/OFF)
1 OFF
2 OFF
3 OFF
4 OFF
5 ON
6 ON
7 OFF
8 ON
Fig.189: Jumpers at TSP400
► Check that the jumpers(1) are in place as
shown in the picture above.
3 Replacing spare parts
Service Manual Process Lens PL - 03/2025 133
Fig.190: TSP400 version number
► Check that the Version(1) of the circuit
board is of number6 and above. See
label.
Installation
Follow the removal instructions in section “Removing the TSP400” in reverse order for installation.
3 Replacing spare parts
134 Service Manual Process Lens PL - 03/2025