Process Lens PL Service Manual_EN.pdf - 第65页
3 Replacing spare parts Se rv ic e Ma nu al P ro ce ss L en s PL - 0 3/ 20 25 65 Calibrating the lifting table motor After completing the work on the lifting table, this will need to be calibrated. Procedure Fig.84: Ent…
3 Replacing spare parts
64 Service Manual Process Lens PL - 03/2025
Checking free movement of lifting table
After all work on the lifting table mechanics check the free movement of the lifting table.
Fig.83: Lifting the table
► Click on this icon(1) to enter the settings menu.
► Click on Unit Function(2) to enter the settings user menu.
► Switch to the operator level Machine service or better.
► In the Conveyor aera click on Lift Home(3) to move the lifting table to the home position.
► Click on Lift up(4) and Lift Down(5) to ensure all lifting mechanical parts are not obstructed or
there are any assembly issues.
3 Replacing spare parts
Service Manual Process Lens PL - 03/2025 65
Calibrating the lifting table motor
After completing the work on the lifting table, this will need to be calibrated.
Procedure
Fig.84: Enterring the calibration menu
► Click on this icon(1) to enter the settings menu.
► Click on Unit Function(2) to enter the settings user menu.
► Switch to operator level Machine service.
► Click on System Test(3) to enter the calibration menu.
Fig.85: Calibration
3 Replacing spare parts
66 Service Manual Process Lens PL - 03/2025
► In the Track Width Calibration area(4) select the right track.
► Click on the Lift Table Calibration button(5) to calibrate right track of the lifting table.
► Repeat the calibration the same way for the left track.
3.5.1.3 Conveyor drive
Replacing the conveyor drive
Parts
Fig.86: Conveyor drive
03093387‑xx DC drive motor with synchronizing disk SXa
Equipment and tools
00326015‑xx Belt tension measuring device
00353832-xx Allen key set
00096290-xx Fork wrench set
Side cutter
Cable tie