DECAN_S2_Admin(Eng_Ver4.5).pdf - 第211页
7-46 Advanced Chip Shooter DECAN S2 Admi nistra t or’s Guide - : OK –Consi d ered to be picked up normall y . - : NG –Considered to be pick ed up upside down. <Load default data> butto n Shows examples for inputt…
7-45
Part Registration
: Triangle mark in the 180° direction.
: Triangle mark in the 270° direction.
: There is a recess or protrusion at the bottom surface of the part
in the left direction. (concavo-convex)
: There is a recess or protrusion at the bottom surface of the part
in the right direction. (concavo-convex)
: Selected when recognizing the shape of a part rotated by 90
degrees. This is not used currently.
: When performing work by recognizing an FCOM (LED chip) in
4 directions
Select the option function used when recognizing the LED using the vision
system in the <Data Setting> group.
<Auto> check box
When there is a black area on the LED bottom surface (surface to be
recognized by the vision system) without specific marks such as a
tetragon or triangle on it, if this check box is selected, this image is
considered to be one of the images shown below.
<4-Way Placing> check box
When recognizing an LED part, if it was picked up being turned 180°, this
function allows the part to be placed by turning it 180° without dumping
it. Mainly, this function is enabled when using a bowl feeder.
In order to use this function, the characteristics, position and size of the
LED mark must be inputted correctly. When there is a symmetrical mark
on the bottom surface of the part, exercise care not to use this function.
7-46
Advanced Chip Shooter DECAN S2 Administrator’s Guide
- : OK –Considered to be picked up normally.
- : NG –Considered to be picked up upside down.
<Load default data> button
Shows examples for inputting an LED mark, and indicates the default
value saved in the system regardless of the part actually picked up.
This function is a guide for inputting certain types of value. Since this data
has nothing to do with the part to be actually placed, use the data for
reference only.
In addition, when it is desired to return all values inputted back to the
default value, this function can be used.
It is possible to judge whether inputted values for ‘Area 1’ and ‘Area 2’ are
appropriate by clicking the <Outline> button.
Whether to recognize the polarity must be checked by clicking the <Test>
button. If the recognition result is ‘OK’, when the <Test> button is clicked
again, with the part being turned 180° manually using the jog box, check
whether the recognition result is ‘NG’.
If the setup has been performed properly, click the <Close> button to save the
set value.
<Rough Check> check box
When recognizing a part, if a recognition error occurs because the shape of the
part to be recognized does not match with the vision algorithm data, select this
check box.
If this check box is selected, even if a certain shape of the part to be recognized is
more or less incorrect when compared with the vision algorithm data, the part is
recognized correctly in case it is identical when checking the layout of the entire
parts.
As a part whose leads are slightly bent, it uses a crystal or aluminum capacitor.
This is applied only to Chip-rect, Chip-aluminum, etc.
<Use Chip R flip auto check> check box
This is used only in the Part Edit Screen for Chip R part. It is selected to use the
function that checks the turnover of the Chip R part.
7-47
Part Registration
(Chip-R3216, Chip-R2012, Chip-R1608, Chip-R1005, Chip-R0603, Chip-R0402
etc.)
Please refer to“7.1.1 Common Align Data” for more information.
<Move> button
Tests component recognition by using the set align data. Please refer to“7.1.1
Common Align Data” for more information.
<Test> button
Tests component recognition by using the set align data. Please refer to“7.1.1
Common Align Data” for more information.
<Image Capture> button
Helps to specify the optimum lighting value. The lighting is gradually changed
automatically and the images are saved. The user can check the best image and
identify the optimum lighting value. Please refer to“7.1.1 Common Align Data” for
more information.
<Auto Teach> button
Automatically finds out the component align data. For more details, refer the “<Use
LED flip check>Check Box”of“7.1.1 Common Align Data” for more information.