DECAN_S2_Admin(Eng_Ver4.5).pdf - 第26页

Preface xi The placement Speed The following data concerns the speed of placement for each part. The actual cycle time can vary depending on the size of PCB, frequency of the nozzle replacement, etc. The pick and place c…

100%1 / 609
Advanced Chip Shooter DECAN S2 Administrator’s Guide
x
Specifications of Machine
Applicable component sizes
Vision recognition system
The sizes of components applicable to this machine are prescribed in the following table,
and is applicable to general components usage as well.
Tablei.1Configuration of the Head and Vision Recognition System
Hs Head
Flying vision
MEGA FOV 24
mm
Chips
0402 ~ □16 mm
IC, Connector
Less than □16 mm
Greater than Lead Pitch :
0.4 mm
BGA, CSP
Less than □16 mm
Greater than Ball Pitch : 0.4
mm
Maximum height
Flying vision 12 mm
FS Head
Flying vision
MEGA FOV 24
mm (Front /
Rear)
Chip 0402 ~□ 16 mm
IC, Connector
Less than □16 mm
Greater than Lead Pitch :
0.4 mm
BGA, CSP
Less than □16 mm
Greater than Ball Pitch : 0.4
mm
Upward vision
MEGA
FOV 35
mm (Rear)
IC, Connector
Less than □16 mm
Greater than Lead Pitch :
0.3 mm
Less than □32 mm
Greater than Lead Pitch :
0.4 mm
BGA, CSP
Less than □16 mm
Greater than Ball Pitch : 0.4
mm
Less than □32 mm
Greater than Ball Pitch : 0.5
mm
Preface
xi
The placement Speed
The following data concerns the speed of placement for each part. The actual cycle time
can vary depending on the size of PCB, frequency of the nozzle replacement, etc.
The pick and place cycle time
Tablei.2The pick and place speed
Memo In actual placement, the conditions that determine the cycle time may
vary depending on many factors such as the type of components, size
of PCB, placement position, etc. For more detailed information,
please contact our business department or the local agent.
FS Head
Upward vision
MEGA FOV 45
mm (Rear)
IC, Connector
Less than □32 mm
Greater than Lead Pitch :
0.4 mm
Less than □42 mm
Greater than Lead Pitch :
0.5 mm
BGA, CSP
Less than □16 mm
Greater than Ball Pitch : 0.4
mm
Less than □32 mm
Greater than Ball Pitch : 0.5
mm
Less than □42 mm
Greater than Ball Pitch : 1.0
mm
Maximum Height
Flying vision 10 mm
Upward vision 15 mm
Classifi
cation
Speed Remarks
Chip
92,000 CPH (1608)
Simultaneous Pickup Standard Fly Vision
Advanced Chip Shooter DECAN S2 Administrator’s Guide
xii
Size and mass of the machine
Height (Under the condition that the height of the PCB upper surface is 900 mm)
1: Up to the upper surface of signal light (1,995 mm)
2: Length (1,430 mm)
3: Width (1,740 mm Including front / rear cover)
4: Up to the upper surface of cover (1,485mm)
Mass (The mass which does not include the Docking Cart and Feeder.)
Type Mass (kg) Height of Conveyor
DECAN S2
(Standard)
1,800 900mm
1,860
950mm
DECAN S2
(Docking Option)
1,770 900mm
1,830
950mm