DECAN_S2_Admin(Eng_Ver4.5).pdf - 第223页
7-58 Advanced Chip Shooter DECAN S2 Admi nistra t or’s Guide Figure7.20 “Pac kage Group =SOP 2”dialog box Figure7.21 “Pac kage Group =SOJ 2 ”dialog box <Camer a No.> combo box Select the camera to recognize the c…
7-57
Part Registration
7.1.3. IC component data setting
7.1.3.1. SOP/ SOJ/ SOP2/ SOJ2 component data setting
Set the align data for SOP/ SOJ/ SOP2/ SOJ2 components.
Figure7.18 “Package Group =SOP” dialog box
Figure7.19 “Package Group =SOJ” dialog box
7-58
Advanced Chip Shooter DECAN S2 Administrator’s Guide
Figure7.20 “Package Group =SOP2”dialog box
Figure7.21 “Package Group =SOJ2”dialog box
<Camera No.> combo box
Select the camera to recognize the component. Please refer to “7.1.1 Common Align
Data” for more Information.
button
Select the light for the camera to recognize the component. Please refer to“7.1.1
Common Align Data” for more Information.
<Size> group
7-59
Part Registration
Set the align size.
<Lead Num> edit box
Set the number of leads on a side.
<Missing Pin Num> edit box
Input the number of empty leads at the center of the lead group, which are located
diagonally at the upper and lower sides. If the leads are not emptied diagonally at
the upper and lower sides, register the part as User IC.
<Total Y> edit box [SOP /SOJ]
Displays the size of the whole component in Y direction. It is calculated and
displayed when <Body Y> and <Lead Length> are determined. ( <Body Y>
+<Lead Length> *2)
<Total X> edit box [SOP2 /SOJ2]
Displays the size of the whole component in X direction. It is calculated and
displayed when <Body X> and <Lead Length> are determined. ( <Body X>
+<Lead Length> *2)
<Body Y> edit box
Set the component size in Y direction.
<Tolerance> edit box
Set the tolerance of the component data. Default is 30%.
<Lead Width> edit box
Set the width of lead.
<Lead Pitch> edit box
Set the lead pitch.
<Lead Foot> edit box
Set the length of the lead that touches the surface.
<Lead Length> edit box
Set the length of the lead viewed in the Align Camera.
For other setups, please refer to“7.1.1 Common Align Data”.
<Option> group
Set the Align Option data. Please refer to“7.1.1 Common Align Data” for more
Information.
<Move> button
Used for parts recognition test by manually picking up parts.Please refer to“7.1.1
Common Align Data” for more Information.
<Test> button
Tests component recognition by using the set align data. Please refer to“7.1.1