DECAN_S2_Admin(Eng_Ver4.5).pdf - 第227页

7-62 Advanced Chip Shooter DECAN S2 Admi nistra t or’s Guide  <Image Capture> bu tton Helps to specify the optimum lighting value. The lighting is gradually changed automatica lly and the images are saved. The use…

7-61

Part Registration

Set the number of leads on the X direction.

 <Y Lead Num> edit box

Set the number of leads on the Y direction.

 <Total X> edit box

Displays the size of the whole component in X direction. It is calculated and

displayed when <Body X> and <Lead Length> are determined. ( <Body X>

+<Lead Length> *2)

 <Total Y> edit box

Displays the size of the whole component in Y direction. It is calculated and

displayed when <Body Y> and <Lead Length> are determined. ( <Body Y>

+<Lead Length> *2)

 <Tolerance> edit box

Set the tolerance of the component data. Default is 30%.

 <Body X> edit box

Set the component size in X direction.

 <Body Y> edit box

Set the component size in Y direction.

 <Lead Width> edit box

Set the width of lead.

 <Lead Pitch> edit box

Set the lead pitch.

 <Lead Foot> edit box

Set the length of the lead that touches the surface

 <Lead Length> edit box

Set the length of the lead viewed in the Align Camera.

For other setups, please refer to “7.1.1 Common Align Data”.

 <Option> group

Set the Align Option data. Please refer to“7.1.1 Common Align Data” for more

Information.

 <Move> button

Used for parts recognition test by manually picking up parts.Please refer to “7.1.1

Common Align Data” for more Information.

 <Test> button

Tests component recognition by using the set align data. Please refer to “7.1.1

Common Align Data” for more Information.

7-62

Advanced Chip Shooter DECAN S2 Administrator’s Guide

 <Image Capture> button

Helps to specify the optimum lighting value. The lighting is gradually changed

automatically and the images are saved. The user can check the best image and

identify the optimum lighting value. Please refer to“7.1.1 Common Align Data” for

more Information.

 <Auto Teach> button

Automatically finds out the component align data. Please refer to“7.1.1 Common

Align Data” for more Information.

7.1.3.3. PLCC component data setting

Set the align data for PLCC components. Please refer to “7.1.3.5 QFP component data

setting” for more Information.

7.1.4. User IC component data setting

Set align data for User IC components. First, the basic concept behind User IC component

data setting is explained. Please refer to the next figure.

Figure7.23 The basic concept of User IC component data setting

1: Register overall information on the component

2: Data that have lead information on lead forms

3: Data that specify the position where the lead are converged

4: Information on the position of empty in the lead group

 User IC component data has one whole data.

 User IC component data has up to 16 lead groups.

 User IC component data has equal or fewer lead parameters than the lead groups (up to

8).

 Each lead group must specify 1 corresponding lead parameter.

 Each lead group has up to 4 lead gaps.

7-63

Part Registration

Figure7.24 “Package Group =User IC” dialog box

 <Camera No.> combo box

Select the camera to recognize the component. Please refer to “7.1.1 common Align

Data” for more information.

 <Size> group

Set the align size.

 <Body X Typical> edit box

Set the size of component body in X direction.

 <Body X Max> edit box

Set the maximum size of component body in X direction.

 <Body X Min> edit box

Set the minimum size of component body in X direction.

 <Body Y Typical> edit box

Set the size of component body in Y direction.

 <Body Y Max> edit box

Set the maximum size of component body in Y direction.

 <Body Y Min> edit box

Set the minimum size of component body in Y direction.

 <Lead Type> combo box

Select the lead type. Available lead types are as follows.