OM-1012-001.pdf - 第101页

5.2 Program Change Tg0869-PM-OM 0305-001 Chapter 1 2-22 When a pallet is set in the magazine, note the direction of the cutout and do not set the pallet upside down. (See Figs. A40 and A41.) When the [U READY] or the [L …

5.2 Program Change

Tg0869-PM-OM

5.2.2.2 Pallet Attachment to Magazine

(1) Push both handles of the magazine door fixture down in direction shown

by an arrow A and release the lock of the magazine door. (Fig. A37 and

Fig. A38, Arrow A)

(2) Open the magazine door. (Fig. A39 Arrow B)

(a) Because the magazine door might become deformed by

impact, open it gently, holding the grip. If operation is

started with a deformed magazine door, it might cause

machine breakdown.

(b) Do not place any thing on the open door or put any pres-

sure on it.

0305-001 Chapter 1 2-21

Fig. A37 How to open the magazine door

Fig. A38 Latched Magazine Door Fixture

Fig. A39 Unlatched Magazine Door Fixture

Grip

5.2 Program Change

Tg0869-PM-OM

0305-001 Chapter 1 2-22

When a pallet is set in the magazine, note the direction of the cutout

and do not set the pallet upside down.

(See Figs. A40 and A41.)

When the [U READY] or the [L READY] button is pressed with the pallet

not oriented correctly, the error is detected. However, when the pallet is

inserted upside down, the error is not detected, causing a failure.

The contents of the error are displayed on the operation monitor.

Fig. A41 MG-5050L (For FP-5022L)Fig. A40 MG-5050R (For FP-5022R)

Coutout of Pallet

Side without

Side Plate

Side without

Side Plate

Cutout of Pallet

Side Plate Side

Pallet Drawing

Direction

Pallet Drawing

Direction

(3) Set the pallet equipped with a tray in the magazine.

Put the pallet on the partition plate and push it inside.

(4) Press the black circle point shown in the label in Fig. A43 to close the

magazine door.

Fig. A42

Fig. A43

CAUTION

5.2 Program Change

Tg0869-PM-OM

0305-001 Chapter 1 2-23

(5) Confirm that the magazine door is latched. (Fig. A45)

If the magazine door is closed roughly, components might be bumped

out of the tray. Close it gently and securely.

If the magazine door is not latched securely, it may open suddenly dur-

ing operation (while the machine is running), causing some damage to

the machine.

5.2.2.3 Pallet Detachment from Magazine

(1) Push both handles of the magazine door fixture down in direction shown

by an arrow A to unlatch the magazine door. (Fig. A37 and Fig. A38,

Arrow A)

(2) Open the magazine door.

(Fig. A39 Arrow B)

(3) Pull out the pallet to be detached.

Fig. A44 Unlatched Magazine Door Fixture Fig. A45 Latched Magazine Door Fixture

CAUTION