OM-1012-001.pdf - 第87页
5. Preparation and Confirmation before Operation 5.1 Preparation (Outline) for Pattern Program 5.1.1 Component Library Data Editing Procedure of Component Library Data for FP-5022L (The same procedure applies to the comp…
4. Set-up and Flow Chart for Automatic Operation
• The shadowed items are related to the multi-layer tray feeders.
Follow the procedures (outline) below before actually producing P.C.B.’s
for details.
Refer to “5., 6., and 10. of Section 2 in Chapter 1” for details.
4. Set-up and Flow Chart for Automatic Operation
0305-001 Chapter 1 2-7 Tg0869-PM-OM
Component Replenishment during Automatic Operation
Refer to "7.1 Component Supply During Automatic Operation of
Section 2 in Chapter 1" for details.
Possible Operations during Automatic Operation
Refer to "11.1.3 Tray Chuck Matrix Change Operations of Section 2 in Chapter 1"
and "4. Matrix Change Operations of Section 3 in Chapter 1" for details.
Preparation for Pattarn Program
Program Change Operation
Pattern Program Checking for Production Model
Setting of Operation Mode
Start of Automatic Operation
Stop of Automatic Operation
Shut-Down Operation
(1) Preparation for Component Library
Refer to "5.1.1 Component Library Data of Section 2 in Chapter 1" for details.
(2) Creation of Pattern Program Data for Production Model
Refer to "5.1.2 Component Data of Section 2 in Chapter 1" for details.
(3) Registration of Pattern Program for Production Model
(1) Zeroing Operation
Refer to"2. Zeroing Operation of Section 4 in Chapter 1" and "11.1.2 Zeroing
Operation Maneuvered on Main Machine Side of Section 2 in Chapter 1" for details.
(2) Selection of Current Pattern program (Program Change)
(3) Adjustment of P.C.B. Positioning Section
(4) Preparation for Nozzle Stocker Section
(5) Preparation for Multi-Layer Tray Feeder
Refer to "5.2.1 Preparation of Pallet of Section 2 in Chapter 1",
"5.2.2 Preparation of Magazine of Section 2 in Chapter 1",
"5.2.3 Attachment and Detachment of Magazine of Section 2 in Chapter 1",
"5.2.4 FEEDER (B) OFFSET Display of Section 2 in Chapter 1" for details.
5. Preparation and Confirmation before Operation
5.1 Preparation (Outline) for Pattern Program
5.1.1 Component Library Data
Editing Procedure of Component Library Data for FP-5022L
(The same procedure applies to the component library data for
FP-5022R.)
Refer to “COMPONENT LIBRARY” in main machine instruction manual for
details.
Data can be edited on the main machine side.
(1) When the [TRAY] key is pressed at the “COMP. LIBRARY [FEEDER]”
display, the following display appears on the screen.
(2) Enter the component library data.
The component library data cannot be edited with the main ma-
chine in the “RUN” or “WAIT” mode when the multi-layer tray
feeder is included in the production model.
Fig. A16
Hierarchical Sequence
(Display)
“MAIN MENU”
“DATA EDIT”
“COMPONENT LIBRARY
EDIT”
“COMP. LIBRARY
[FEEDER]”
5. Preparation and Confirmation before Operation
0305-001 Chapter 1 2-8 Tg0869-PM-OM
Fig. A18
Fig. A17
5.1.2 Component Data
5.1.2.1 Component Data
Refer to “2.5.3 Tray Feeders (Option) of Section 2 in Volume 2” and “4.5.2
Editing of Tray Component Data (Option) of Section 2 in Volume 2” in the
main machine instruction manual for details.
Data can be edited on the main machine side.
(1) Press the [TRAY L (F301-F599)] or the [TRAY R (F601-F899)] key at
the “PATTERN PROGRAM EDIT” display. The display (Fig. A17) ap-
pears on the screen.
(2) Press the [DATA EDIT] key.
The display (Fig. A18) appears on the screen.
(3) Component IDs are allocated to feeder Nos. (FDR No.).
The component data can be edited only with the main machine in
the “STOP” or “PAUSE” mode when the multi-layer tray feeder
is included in the production model.
Hierarchical Sequence
(Display)
“MAIN MENU”
“DATA EDIT”
“PATTERN PROGRAM”
“PATTERN PROGRAM
EDIT”
“COMPONENT DATA
-TRAY-”
5.1 Preparation (Outline) for Pattern Program
[DATA EDIT] Key[RTN] Key
0305-001 Chapter 1 2-9 Tg0869-PM-OM