OM-1012-001.pdf - 第5页

About the Instruction Manual Chapter 3: T roubleshooting T roubleshooting methods are described for users of the device. Coverage: This covers the troubleshooting on simple errors and the reset procedure from error indic…

100%1 / 273
0305-001 3 Tg0869-PM-OM
About the Instruction Manual
• This instruction manual is classified into several volumes on subjective
basis as follows.
Instruction Manual of Main Machine
This manual describes the check items, the safety precau-
tions, the operations, the creation of component library data,
the maintenance, and the troubleshooting for the machine
operators and the electrical circuit diagrams for service per-
sonnel.
Please read this manual thoroughly before operating the
multi-layer tray feeder.
Instruction Manual of Multi-Layer Tray Feeder
Chapter 1: Operation
This manual describes the safety precautions and
operational procedures for the machine operators.
Coverage: This covers the outline, the specifications,
and the functions of the machine, the
preparatory and ending procedures of
automatic operation, and various menus
related to the program change and auto-
matic operations.
Chapter 2: Programming
This describes various data for a programmer (s) who
creates pattern programs and a supervisor who must
understand the meanings of various data.
Coverage: This covers the offset data.
Refer to the instruction manual of the main
machine for the other data.
Volume 1: Operation
Volume 2: Programming
Volume 3: Troubleshooting
Volume 4: Maintenance
Volume 5: Materials
Component Library
INSTRUCTION MANUAL
MULTI-LAYER TRAY FEEDER
FP-5022L FP-5022R
About the Instruction Manual
Chapter 3: Troubleshooting
Troubleshooting methods are described for users of the
device.
Coverage: This covers the troubleshooting on simple
errors and the reset procedure from error
indications.
Chapter 4: Maintenance
Periodical maintenance, etc. are described for mainte-
nance personnel.
Coverage: This covers the periodic maintenance, the
list of consumables and servicing parts.
Chapter 5: Materials
This provides various kinds of material such as air piping
and electrical circuit diagrams for those who are in charge
of machine servicing operations.
Coverage: Air Piping Diagram, Parts Location, Electrical
Circuit Diagrams, etc.
• This manual may not be copied, in whole or part, without
written consent of the publisher.
• This manual should be regarded as part of the machine and
the contents comply with all the specifications regarding the
purchased machine. Please keep this manual within reach to
serve as a handy tool in completely understanding the work-
ings of this machine.
• The contents of this manual are subject to change without
prior notice.
0305-001 4 Tg0869-PM-OM
Contents
Page
Before Use ................................................................................................... 1
About the Instruction Manual ....................................................................... 3
Contents ....................................................................................................... 5
About Precaution Labels ............................................................................ 11
Checking Item ............................................................................................ 12
1. Modification Prohibition ...................................................................... 12
2. Recommendation for Training ............................................................ 14
3. Relocation and/or Resale of the Device ............................................. 15
Name of Each Section ............................................................................... 18
Safety Precautions ..................................................................................... 21
1. Basic Precautions .............................................................................. 21
1.1 Safety Check before Powering ..................................................... 21
1.2 Turn off the power when natural disaster or emergency occurs .. 23
1.3 Precautions against Contamination by Foreign Substance ......... 25
2. Precautions before Operation ............................................................ 26
2.1 Safety Check before Operation .................................................... 26
2.2 Always Check before Operation ................................................... 28
2.3 Close the magazine door securely ............................................... 29
3. Precautions During Operation ............................................................ 30
3.1 Ideally, the device should be operated by one person ................. 30
3.2 Take care when the Tower Light is ON (Stand-by Status) ............ 31
3.3 Turn off the Power depending on the Condition ........................... 32
3.4 Remove any Incorrectly Picked up Component ........................... 34
4. Precautions in Maintenance ............................................................... 35
4.1 Turn off the power and air before maintenance ........................... 35
4.2 Always Attach the Removed Cover .............................................. 37
4.3 During maintenance, enclose the machine area .......................... 39
4.4 When the person in charge of maintenance leaves the machine
during maintenance, turn off the power and air .......................... 41
5. Precautions in Installation .................................................................. 43
5.1 Always contact our marketing department or sales agency
before relocation or resale of the device ........ 43
5.2 Install the device somewhere where
the floor strength is adequate .................. 45
5.3 Do not allow any blows to the Device........................................... 46
5.4 Install the device somewhere where there is no vibration............ 47
5.5 Install the device somewhere where atmospheric
temperature and humidity is within the specified range ....... 48
5.6 Install the device somewhere where there is no electrical noise . 49
5.7 Install the device in clean air ........................................................ 50
0305-001 5
Tg0869-PM-OM