OM-1012-001.pdf - 第85页
3. Power Source Check and Power-Up Procedures Refer to “3. Confirmation and Procedure of Power Supply of Section 2 in V olume 1” in the main machine instruction manual for details. • The tray feeders are not provided wit…
2. INITIALIZATION Display
0305-001 Chapter 1 2-5 Tg0869-PM-OM
• When the [LINE MODE] key is pressed, the feeder is set in the
“LINE” mode and the display (Fig. A13 or Fig. A14) appears
on the screen.
The “LINE” mode can also be set from the main ma-
chine side.
Refer to “11.1.1 Changing from “NEUTRAL” to “LINE”
Mode of Section 2 in Chapter 1” for details.
Fig. A14 FP-5022R
Fig. A13 FP-5022L
Hierarchical Sequence
(Display)
“MAIN MENU”
“DATA EDIT”
“AUTO OPN MODE
(PLACEMENT)”
“AUTO OPN
SUB-MENU”
Fig. A15
• When the [LOCAL MODE] key is pressed, the following “LOCAL MODE”
display appears on the screen, enabling the zeroing and manual operations of
the multi-layer tray feeder.
3. Power Source Check and Power-Up Procedures
Refer to “3. Confirmation and Procedure of Power Supply of Section 2 in
Volume 1” in the main machine instruction manual for details.
• The tray feeders are not provided with any power breaker cranks and [POWER
ON] switches.
The power breaker crank and the [POWER ON] button of the main machine
are commonly used for the feeders.
• Power and air are supplied to the tray feeders from the main machine.
3. Power Source Check and Power-Up Procedures
0305-001 Chapter 1 2-6 Tg0869-PM-OM
4. Set-up and Flow Chart for Automatic Operation
• The shadowed items are related to the multi-layer tray feeders.
Follow the procedures (outline) below before actually producing P.C.B.’s
for details.
Refer to “5., 6., and 10. of Section 2 in Chapter 1” for details.
4. Set-up and Flow Chart for Automatic Operation
0305-001 Chapter 1 2-7 Tg0869-PM-OM
Component Replenishment during Automatic Operation
Refer to "7.1 Component Supply During Automatic Operation of
Section 2 in Chapter 1" for details.
Possible Operations during Automatic Operation
Refer to "11.1.3 Tray Chuck Matrix Change Operations of Section 2 in Chapter 1"
and "4. Matrix Change Operations of Section 3 in Chapter 1" for details.
Preparation for Pattarn Program
Program Change Operation
Pattern Program Checking for Production Model
Setting of Operation Mode
Start of Automatic Operation
Stop of Automatic Operation
Shut-Down Operation
(1) Preparation for Component Library
Refer to "5.1.1 Component Library Data of Section 2 in Chapter 1" for details.
(2) Creation of Pattern Program Data for Production Model
Refer to "5.1.2 Component Data of Section 2 in Chapter 1" for details.
(3) Registration of Pattern Program for Production Model
(1) Zeroing Operation
Refer to"2. Zeroing Operation of Section 4 in Chapter 1" and "11.1.2 Zeroing
Operation Maneuvered on Main Machine Side of Section 2 in Chapter 1" for details.
(2) Selection of Current Pattern program (Program Change)
(3) Adjustment of P.C.B. Positioning Section
(4) Preparation for Nozzle Stocker Section
(5) Preparation for Multi-Layer Tray Feeder
Refer to "5.2.1 Preparation of Pallet of Section 2 in Chapter 1",
"5.2.2 Preparation of Magazine of Section 2 in Chapter 1",
"5.2.3 Attachment and Detachment of Magazine of Section 2 in Chapter 1",
"5.2.4 FEEDER (B) OFFSET Display of Section 2 in Chapter 1" for details.