OM-1012-001.pdf - 第59页
Tg0869-PM-OM 58 0305-001 7.2 Affixing Positions for W arning Labels on the Multi-Layer T ray Feeder Description: Do Not T ouch Any Internal Sections of the Machine. Results: Electric Shock, Fire, Smoke Prevention Measure…
Tg0869-PM-OM
7. Affixing Positions for Warning Labels
7.1 Warning Labels
Warning labels have been affixed close to positions of concern.
When the machine is to be operated, read the instructions on the warning labels before the operation.
Precautions in Handling Warning Labels
• If a warning label becomes dirty, clean it with water or neutral detergent solution.
Do not use gasoline or organic solvent.
• If the dirt can not be removed, and the working label is damaged or peeled off, contact our Marketing Dept. or agency.
• When a warning label is to be replaced, check that the new warning label is the same as the old one.
7.2 Affixing Positions for Warning Labels on the Multi-Layer Tray Feeder
The figure shows the FP-5022L model. In the case of FP-5022R model, the warning labels are affixed symmetrically with the FP-5022L model, just as in a reflected image.
0305-001 57
7. Affixing Positions for Warning Labels
Description: Do Not Touch Any Internal
Sections of the Machine.
Results: Electric Shock, Fire, Smoke
Prevention Measure: Turn off the power.
Description:
Keep Hands Clear While
Machine is Cycling
Results: Injury or Collision of
machine.
Prevention Measure:
Keep your hand or thing away
from the moving range of the
operating machine.
Description: Do Not Touch Any Internal
Sections of the Machine.
Results: Electric Shock, Fire, Smoke
Prevention Measure: Turn off the power.
Tg0869-PM-OM580305-001
7.2 Affixing Positions for Warning Labels on the Multi-Layer Tray Feeder
Description: Do Not Touch Any Internal Sections
of the Machine.
Results: Electric Shock, Fire, Smoke
Prevention Measure: Turn off the power.
Description: Keep Hands Clear
While Machine is Cycling
Results: Injury or Collision of machine.
Prevention Measure:
Keep your hands, and anything else,
away from the moving range of the
operating machine.
Tg0869-PM-OM
7.3 Affixing Positions for Warning Labels on Magazine
The figure shows Magazine L (MG-5050L).
Magazine R (MG-5050R) has the same structure.
0305-001 59
Description: Press the black circle to close the door.
Result: Distortion of Door
Prevention Measure: Do not press other than with the black circle.
7.3 Affixing Positions for Warning Labels on Magazine