OM-1012-001.pdf - 第93页
5.2 Program Change 0305-001 Chapter 1 2-14 Tg0869-PM-OM 5.2 Program Change 5.2.1 Pallet Set-up 5.2.1.1 Precautions in Pallet Handling • Do not drop the pallet on the floor . It might cause pallet deformation. • Do not pr…
5.1.3 Magazine Alternate Function
Refer to “2.5.5 TRAY (L) OPERATION DATA Display of Section 2 in Vol-
ume 2” and “4.5.4 Editing of Tray (L) or (R) Operation Data of Section 2 in
Volume 2” in the main machine instruction manual for details.
• When this function is used, components can be supplied during automatic
operation without stopping the machine.
The magazine alternate function can be set on the main machine side.
(1) When the [TRAY (L) OPN DATA] key is pressed at the “TRAY (L) STEPS
INFORMATION” or the “TRAY (R) STEPS INFORMATION” display,
the following display appears on the screen.
(2) Press the “MAGAZINE ALTN” data box (*1) to select “ENABLE” or
“DISABLE” to determine whether or not the magazine alternate function
should be used.
ENABLE : The magazine alternate function becomes valid.
DISABLE : The magazine alternate function does not work.
Hierarchical Sequence
(Display)
“MAIN MENU”
“DATA EDIT”
“PATTERN PROGRAM”
“PATTERN PROGRAM EDIT”
“COMPONENT DATA -TRAY-”
“TRAY (L) STEPS
INFORMATION”
“TRAY (L) OPERATION DATA”
5.1 Preparation (Outline) for Pattern Program
*1
Fig. A23
0305-001 Chapter 1 2-13
Tg0869-PM-OM
5.2 Program Change
0305-001 Chapter 1 2-14 Tg0869-PM-OM
5.2 Program Change
5.2.1 Pallet Set-up
5.2.1.1 Precautions in Pallet Handling
• Do not drop the pallet on the floor. It might cause pallet deformation.
• Do not press the pallet as shown in the figure. It might cause deformation.
Fig. A24
• Handle the pallet carefully.
• A deformed pallet may lead to a pick-up error. If pick-
up errors occur frequently, consult our marketing de-
partment or sales agency
Fig. A25
Pressure
Pressure
Drop
CAUTION
5.2 Program Change
Tg0869-PM-OM
• Do not press the pallet as shown in the figure. It might cause Pallet deforma-
tion.
• Do not pile up the pallet to store, as shown in the figure. It might cause Pallet
deformation.
How to check for pallet deformation
(1) Place the pallet on a flat place.
(2) Check against warpage along the whole bottom of the pallet.
Fig. A26
Fig. A27
Fig. A28 Correct Pallet Fig. A29 Deformed Pallet
Pressure
0305-001 Chapter 1 2-15