OM-1012-001.pdf - 第129页

0305-001 Chapter 1 2-50 Tg0869-PM-OM

Procedure for Inversion (leftside right) of Tray Fixing Metal

When the tray fixing metal is used after the parts of the lever section

are rearranged, it must be re-labeled to avoid any mistake in determin-

ing the direction (right or left).

(1) Remove the screw fastening the lever to the base with a Phillips-type

screwdriver.

(2) Remove the screw fastening the spring to the base with a Phillips-type

screwdriver.

(3) Rearrange the direction of the lever.

(4) Fasten the lever to the base with the screw.

• Fasten the lever to “A” in Fig. A81 for MG-5050L.

• Fasten the lever to “B” in Fig. A81 for MG-5050R.

Fig. A81 Position where the lever and the spring should be fastened

(5) Fasten the spring to the base with the screw.

• Engage the spring with “C” in Fig. A81 for MG-5050L.

• Engage the spring with “D” in Fig. A81 for MG-5050R.

11.2 Tray Fixing Metals

0305-001 Chapter 1 2-49 Tg0869-PM-OM

0305-001 Chapter 1 2-50 Tg0869-PM-OM

0305-001 Chapter 1 3-1

Tg0869-PM-OM

Section 3

LINE Mode Menu