CP-842E-842ME System Reference-SYS-CP842-10E.pdf - 第103页
Machine System >> Editing Production Programs On t he Machine SYS-CP842-1.0E 4-67 P i c ku p D a ta De ta i l s Editing Screen Detailed pickup data settings can be specifie d from this screen. Screen Button Explana…
Machine System >> Editing Production Programs On the Machine
4-66
SYS-CP842-1.0E
Editing Operations
The following editing operations can be performed at this screen.
Problem
A vision processing error (pickup error) or
a tolerance error occurs during test
placement.
A tolerance error occurs during test
placement.
Editing Operation
Use the vision commands to check the
vision processing result. Edit the pickup
position offset X, Y values if the following
conditions exist: No part has been picked up.
The picked up part is badly out of position.
The part has been picked up standing on
end.
Use the vision commands to check the
vision processing result. If the picked up part
is not badly out of position, edit the pickup
tolerance X, Y, Q values.
T004E
Machine System >> Editing Production Programs On the Machine
SYS-CP842-1.0E 4-67
Pickup Data Details Editing Screen
Detailed pickup data settings can be specified from this screen.
Screen Button Explanations
A. [Sequence No.]: Switches to the sequence search screen.
B. [Max. Nozzle Size]: Changes the maximum nozzle size (PENNMA) which is
specified in the production program’s part shape data
(ENVDT).
C. [Min. Nozzle Size]: Changes the minimum nozzle size (PENNMI) which is
specified in the production program’s part shape data
(ENVDT).
D. [Backlight Size]: Changes the nozzle minimum backlight size (PEN-
BLM) which is specified in the production program’s
part shape data (ENVDT).
E. [Enable] (Automatic pickup position correction): Changes the automatic pickup
point offset function setting (PTPCRAPO) which is
specified in the production program’s part shape data
(CARRING) to “0: Enable”
F. [Disable] (Automatic pickup position correction): Changes the automatic pickup
point offset function setting (PTPCRAPO) which is
specified in the production program’s part shape data
(CARRING) to “1: Disable”
Push the START button.
FUJI
ErrorOperator
JOG:X Y CAM
Servo CountGEM
CCD Monitor
Pickup Data EditorFUJI_CP7_2001
Front
Close
170
123
Pickup Position Auto Calibration
Enable
Set
Pickup Check
Maximum
Nozzle Diameter
Minimum
Nozzle Daimeter
1.2000
1.2000
Backlight Diameter
8.0
[mm]
[mm]
[mm]
Sequence Number
0 : Non
Disable
Pickup Nozzle
Set Switch
CP7S2017E
A
B
C
D
HF GE
Machine System >> Editing Production Programs On the Machine
4-68
SYS-CP842-1.0E
G. [Set] (Part pickup check): Changes the part pickup check mode (PTPCRPCK)
which is specified in the production program’s part
shape data (CARRING).
H. [Close]: Returns to the production program editing screen.
Editing Operations
The following editing operations can be performed at this screen.
Desired Action
Change the placement nozzle.
Editing Operation
Edit the maximum and minimum nozzle size
values.
Change the placement nozzle.
Edit the backlight size.
Change the "automatic pickup position
correction" function setting.
Edit the "automatic pickup position correction"
function setting.
Change the "part pickup check" setting.
Edit the "part pickup check" setting.
T005E