CP-842E-842ME System Reference-SYS-CP842-10E.pdf - 第176页
Commands >> Command Descriptions 5-48 SYS-CP842-1.0E Panel Loader Main Command Path: [Panel Loader] Press to access the screen at which panels ca n be load ed or flushed out, and the lifter can be raised or lowered…
Commands >> Command Descriptions
SYS-CP842-1.0E 5-47
Out-carrier Pick-up Loader Maintenance
Command Path: [Panel Loader] - [Loader Maintenance] - [Out-carrier Pick-up]
Press to unload the panel on the main conveyor to the out-carrier. Press the START button
to execute.
Revision history:
Out-lifter Pick-up Loader Maintenance
Command Path: [Panel Loader] - [Loader Maintenance] - [Out-lifter Pick-up]
Press to unload the panel on the out-carrier to the out-lifter. Press the START button
to execute.
Revision history:
Output Signal ON/OFF I/O Check
Command Path: [Maintenance] - [I/O check] - [Standard]/[Servo] - [Output signal
ON/OFF]
Press to turn the selected output signal on or off.
Use the arrow-buttons to scroll up and down through the list of input and output sig-
nals.
Revision history:
Out-side Loader Maintenance
Command Path: [Panel Loader] - [Loader Maintenance] - [Out-side]
Press to select the panel unloading side of the machine as the target for subsequent
loader commands.
Revision history:
Pallet Change Pos Machine Calibration Data
Command Path: [Maintenance] - [Calibration] - [Pallet Change Pos]
Press to access the screen at which the pallet change position can be set in calibration
data.
Revision history:
Commands >> Command Descriptions
5-48
SYS-CP842-1.0E
Panel Loader Main
Command Path: [Panel Loader]
Press to access the screen at which panels can be loaded or flushed out, and the lifter
can be raised or lowered.
Revision history:
Part Data Basic Configuration
Command Path: [Maintenance] - [Configuration] - [Basic] - [Part Data]
Press to perform a changeover to the next device in accordance with the conditions
specified in Part data.
Revision history:
Part Data Recovery
Command Path: [Recovery] - [Part Data]
Press to use the recovery limits set in part data.
Revision history:
Parts Camera Resolution Machine Calibration Data
Command Path: [Maintenance] - [Calibration] - [Parts Camera Resolution]
Press to access the screen at which the parts camera resolution can be measured.
Revision history:
Part Rejection Main
Command Path: [Part Rejection]
Press to access the screen at which the part currently held by the placing head can be
rejected.
Revision history:
Parts Miss Basic Configuration
Command Path: [Maintenance] - [Configuration] - [Basic] - [Parts Miss]
Press to execute a forced device check after pick-up errors.
Revision history:
Commands >> Command Descriptions
SYS-CP842-1.0E 5-49
Parts Miss Basic Configuration
Command Path: [Maintenance] - [Configuration] - [Basic] - [Parts Miss]
Press to execute changeover to a next device after pick-up errors.
Revision history:
Parts/Nozzle Reference Machine Calibration Data
Command Path: [Maintenance] - [Calibration] - [Parts/Nozzle Reference]
Press to access the screen at which the parts pick-up height can be measured and set.
Revision history:
Parts Out Basic Configuration
Command Path: [Maintenance] - [Configuration] - [Basic] - [Parts Out]
Press to execute a forced device check when parts are exhausted.
Revision history:
Parts Out Basic Configuration
Command Path: [Maintenance] - [Configuration] - [Basic] - [Parts Out]
Press to execute changeover to a next device when parts are exhausted.
Revision history:
Pass Operation
Command Path: [Operation] - [Pass]
Press to set the operation mode to Pass.
Revision history:
Pick-up Miss Basic Configuration
Command Path: [Maintenance] - [Configuration] - [Basic] - [Pick-up Miss]
Press to perform a forced device check when a parts out condition or pickup error
occurs.
Revision history: