CP-842E-842ME System Reference-SYS-CP842-10E.pdf - 第12页

Safety >> Safety Rules for All Machine Types 2-2 SYS-CP842-1.0E 2.2 Safety Rules for All Machine T ypes DANGER Do not approach moving p arts during automatic or manu al oper- ation. z Do not place hands or other bo…

Safety >> About Symbols

SYS-CP842-1.0E 2-1

2. Safety

Fuji machines are designed and produced with safety as one of our main consider-

ations. However, even a perfectly designed machine can be damaged, or someone can

still be injured if the user does not follow the safety rules. It is the responsibility of

the user to make sure all safety rules are followed during operation and maintenance.

Be sure to read these safety rules before operating the machine. Keep this manual

close at hand when operating the machine.

2.1 About Symbols

This section provides an explanation of the relevant safety precautions to be adhered

to by both operators and those responsible for maintaining the machine. An explana-

tion of the warning labels attached to the machine is also provided.

This manual employs the use of descriptive symbols and provides details of the level of

danger involved in certain operations to accompany the explanations of machine warn-

ing labels and safety related items. Be sure you understand the meanings of these sym-

bols before reading the manual.

2.1.1 Hazard Definitions

Examples of Symbols Used

Symbol Definition

DANGER

Failure to observe this hazard warning will lead to severe

injury or death.

WARNING

Failure to observe this hazard warning may lead to severe

injury or death.

CAUTION

Failure to observe this hazard warning may lead to per-

sonal injury or damage to the machine.

Symbol Explanation

Hazard

A triangle is used to draw your attention to a hazard. The symbol

inside the triangle indicates the nature of the hazard (in this case,

electrical shock).

Prohibition

A circle with a diagonal line is used to draw your attention to an

operation that is prohibited. The symbol inside the circle indicates

the nature of the operation (in this case, disassembly).

A circle with an exclamation mark is used to draw your attention to

to a mandatory action. In other words, you are required to carefully

carry out the given instructions.

Safety >> Safety Rules for All Machine Types

2-2

SYS-CP842-1.0E

2.2 Safety Rules for All Machine Types

DANGER

Do not approach moving parts during automatic or manual oper-

ation.

z Do not place hands or other body parts inside the machine

during automatic operation or positioning. Body parts or

clothing may be caught in the machine causing personal

injury.

WARNING

Do not operate the machine with the safety covers or doors

open.

z Do not leave covers or safety doors open, except during

adjustment.

z hen adjustments are completed, return the covers and

doors to their original (closed) position...

z When safety covers or doors are removed, body parts or

clothing may be caught in the machine causing personal

injury. Always be sure to replace the safety covers or

doors.

Always verify the position of the EMERGENCY STOP buttons

before operating the machine.

z Always be aware of the positions of the EMERGENCY

STOP buttons so that they can be pressed quickly in case

of an emergency.

Check the safety functions before starting operation.

z Before starting the machine check the operation of the

EMERGENCY STOP button, the safety switches on the

acrylic covers, the safety switch on the rear fence gate, the

optical sensors on the rear fence and all other machine

safety features.

z Contact a Fuji serviceman immediately if any of the safety

functions fails.

Safety >> Safety Rules for All Machine Types

SYS-CP842-1.0E 2-3

Do not remove safety switches.

z Do not remove safety switches or disarm the safety func-

tions.

z Disarming the safety switches may result in injury when

others unknowingly press the START button.

z Fuji does not take any responsibility when a machine is

disassembled without Fuji's permission, even if this

results in accidents or trouble.

Check that there is nobody inside the machine when working on

the machine with two persons or more.

z Verify that nobody is within or near the machine before

operating the machine. Operating the machine may cause

injury to the person who is carrying out maintenance.

[Example]

If one person moves the device table while another person is

exchanging a feeder, the latter may be injured.

Do not close the fence when someone is inside the fence.

z When the fence is opened, it is safe to approach the

machine. Closing the fence, however, will put anybody

working inside the fence in immediate danger when the

RESET or START button is pressed. Be sure to leave the

fence open when anyone is inside the fence.

Do not approach a machine that has stopped moving.

z There are times during automatic operation when the

machine may appear to have stopped while it is waiting

for a board, waiting for the next machine, reading marks,

transmitting data, etc. In such cases, once certain condi-

tions are fulfiled, the machine will begin moving again

automatically, so care should be taken. Only approach the

machine after the EMERGENCY STOP button has been

pressed. When the message "Ready" displays at the

machine display, the machine will begin to move once cer-

tain conditions are satisfied.

z Keep in mind that the machine will begin to move regard-

less of whether these conditions are satisfied intentionally

or inadvertently.

Resupply solder paste, glue and parts while the machine is in

manual mode.

z Never resupply solder, glue or parts during automatic

operation unless instructed otherwise. Body parts or

clothing may be caught in the machine causing personal

injury.

WARNING