CP-842E-842ME System Reference-SYS-CP842-10E.pdf - 第105页
Machine System >> Editing Production Programs On t he Machine SYS-CP842-1.0E 4-69 Body Dat a Editing Screen Body data can be edited from this screen. For body data details, refe r to the SMD Operation Ma nual. Scre…
Machine System >> Editing Production Programs On the Machine
4-68
SYS-CP842-1.0E
G. [Set] (Part pickup check): Changes the part pickup check mode (PTPCRPCK)
which is specified in the production program’s part
shape data (CARRING).
H. [Close]: Returns to the production program editing screen.
Editing Operations
The following editing operations can be performed at this screen.
Desired Action
Change the placement nozzle.
Editing Operation
Edit the maximum and minimum nozzle size
values.
Change the placement nozzle.
Edit the backlight size.
Change the "automatic pickup position
correction" function setting.
Edit the "automatic pickup position correction"
function setting.
Change the "part pickup check" setting.
Edit the "part pickup check" setting.
T005E
Machine System >> Editing Production Programs On the Machine
SYS-CP842-1.0E 4-69
Body Data Editing Screen
Body data can be edited from this screen. For body data details, refer to the SMD
Operation Manual.
Screen Button Explanations
A. [Sequence No.]: Switches to the sequence search screen.
B. [Body Length X]: Changes the body’s X-direction length (PTPSZBX)
which is specified in the production program’s part
shape data (PRTFORM).
C. [Body Length Y]: Changes the Body’s Y-direction length (PTPSZBY)
which is specified in the production program’s part
shape data (PRTFORM).
D. [Part Height]: Changes the part height (including leads) (PTPMNH)
which is specified in the production program’s part
shape data (PRTFORM).
E. [Length X] (Check tolerance):Changes the body size’s X-direction tolerance
(PTPTLBX) which is specified in the production pro-
gram’s part shape data (TOLEINF).
F. [Length Y] (Check tolerance):Changes the body size’s Y-direction tolerance
(PTPTLBY) which is specified in the production pro-
gram’s part shape data (TOLEINF).
G. [Detection Count Tolerance]:Changes the lead detection count tolerance
(PTPTLCL) which is specified in the production pro-
gram’s part shape data (TOLEINF).
H. [Vision Type]: Switches to the vision type editing screen.
Push the START button.
FUJI
ErrorOperator
JOG:X Y CAM
Servo CountGEMCCD Monitor
Body Data Editor
FUJI_CP7_2001
Front
Close
Lead
Element
Vision Type
Sequence Number
Size Data
Parts
Height
0.9000
Body
Length Y
2.0000
[mm]
1.2500
Body
Length X
[mm]
[mm]
0.1000
Check Tolerance Values
Length X
Length Y
0.1000
[mm]
[mm]
Lead
0
Detection
Tolerance
[%]
Set Switch
123
CP7S2018E
A
B
C
D
KH I J
E
F
G
Machine System >> Editing Production Programs On the Machine
4-70
SYS-CP842-1.0E
I. [Element]: Switches to the element data editing screen.
J. [Lead]: Switches to the lead data editing screen.
K. [Close]: Returns to the production program editing screen.
Editing Operations
The following editing operations can be performed at this screen.
Problem
Panel's part pattern size differs from the wire
frame size. Or, a vision processing error
occurs during test placement.
Editing Operation
If the part size is incorrect, edit the body
length X and Y values.
A part height error occurs during test
placement.
Error code: 0x12040410
A part height which differs from that
specified in part data was detected.
If the part height is incorrect, edit the part
height value.
A vision processing error occurs during test
placement.
Edit the check tolerance X and Y length
values, and the lead detection count
tolerance value.
T006E