CP-842E-842ME System Reference-SYS-CP842-10E.pdf - 第167页
Commands >> Command Descriptions SYS-CP842-1.0E 5-39 Joint Resupply Operation Command Path: [Operation] - [Joint Resupply] Press to set the device t able mode to Joint Resu pply . Revision history: Lef t to Right M…
Commands >> Command Descriptions
5-38
SYS-CP842-1.0E
Immediate Recovery
Command Path: [Recovery] - [Immediate]
Press to set the recovery action to Immediate.
Revision history:
In-carrier Pick-up Loader Maintenance
Command Path: [Panel Loader] - [Loader Maintenance] - [In-carrier Pick-up]
Press to load the panel on the in-lifter to the in-carrier. Press the START button to
execute.
Revision history:
In-side Loader Maintenance
Command Path: [Panel Loader] - [Loader Maintenance] - [In-side]
Press to select the panel loading side of the machine as the target for subsequent
loader commands.
Revision history:
I/O Check Maintenance
Command Path: [Maintenance] - [I/O Check]
Press to access the screen at which system or servo related I/Os can be selected.
Revision history:
Jog Command bar (All Screens)
Command Path: [Jog]
Press to display a dialog box where inching speeds can be set for each of the axis
groups.
Revision history:
Joint Operation
Command Path: [Operation] - [Joint]
Press to set the device table mode to Joint.
Revision history:
Commands >> Command Descriptions
SYS-CP842-1.0E 5-39
Joint Resupply Operation
Command Path: [Operation] - [Joint Resupply]
Press to set the device table mode to Joint Resupply.
Revision history:
Left to Right Machine Configuration Data
Command Path: [Maintenance] - [Configuration] - [Loader] - [Left to Right]
Press to select panel conveyance from left to right.
Revision history:
Lifter Down Loader Maintenance
Command Path: [Panel Loader] - [Loader Maintenance] - [Lifter Down]
Press to lower the lifter at the selected side of the machine. Press the START button
to execute.
Revision history:
Lifter Up Panel Loader
Command Path: [Panel Loader] - [Lifter Up]
Press to raise the main conveyor. Press the START button to execute the operation.
This command is only operative when the XY-table is at the loading and unloading
positions.
Revision history:
Lifter Up Loader Maintenance
Command Path: [Panel Loader] - [Loader Maintenance] - [Lifter Up]
Press to raise the lifter at the selected side of the machine. Press the START button to
execute.
Revision history:
Commands >> Command Descriptions
5-40
SYS-CP842-1.0E
Load Operator Data Manager
Command Path: [Maintenance] - [Operator] - [Data Manager] - [Load]
Press to display the screen at which operator settings can be copied from the hard disk
or floppy disk.
Revision history:
Loader Machine Configuration Data
Command Path: [Maintenance] - [Configuration] - [Loader]
Press to access the screen at which the panel flow direction and use of the panel
request signal can be specified.
Revision history:
Loader Cylinder Maintenance
Command Path: [Maintenance] - [Loader Cylinder]
Press to access the screen at which loader related adjustment items can be selected.
Revision history:
Loader Data Production
Command Path: [Production] - START button - [Loader Data]
Press to change the display during production to loader related information.
Revision history:
Loader Maintenance Panel Loader
Command Path: [Panel Loader] - [Loader Maintenance]
Press to access the screen at which loader maintenance and panel conveyance com-
mands can be accessed.
Revision history: