4OM-1429-008_w.pdf - 第138页
2-5 0707-001 2.2 List of W arning Messages W arning Codes Display Field A (Scope of W arning Messages) Display Field B (Details of W arning Messages) 010f01 P .C.B. existence Please remove the P .C.B. on the conveyor . 0…
2-40707-001
2.2 List of Warning Messages
2.2 List of Warning Messages
Table 4B1
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
010101 Emergency Stop
Press [POWER ON] button to activate Load Power circuit.
010102 Emergency Stop
Press [POWER ON] button to activate Load Power circuit.
010201 Air Pressure Drop
Increase air pressure and press the [POWER ON] button to turn on the
machine.[K6]
010202 Air Pressure Drop
Increase air pressure and press the [POWER ON] button to turn on the
machine.[K6]
010301 Safety cover
Please close and lock the safety cover.
010401 Safety cover lock confirm
Please close and lock the safety cover.
010501 Beam XY main loop OFF
Press [POWER ON] button to activate Load Power circuit.
010502 Beam XY main loop OFF
Press [POWER ON] button to activate Load Power circuit.
010601 Head main Loop OFF
Press [POWER ON] button to activate Load Power circuit.
010602
Head main Loop OFF
Press [POWER ON] button to activate Load Power circuit.
010701 Stage is not ready
Please close and lock the safety cover.
010801 Feeder base is not connected.(rear)
Please connect the feeder base connector.[B0916]
010901 Feeder base is not connected.(front)
Please connect the feeder base connector.[B0916]
010a01 Vacuum pump
Please turn on the vacuum pump.
010b01 Feeder is not ready (rear)
Please turn on the Feeder Ready SW (rear).
010c01 Feeder is not ready (front)
Please turn on the Feeder Ready SW (front).
010d01 Pattern program is not set
Please set the patterm program
010e01 Auto setup not finish
Please remove the P.C.B. on equipment and execute the automatic arrangement.
2-50707-001
2.2 List of Warning Messages
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
010f01 P.C.B. existence
Please remove the P.C.B. on the conveyor.
010f02 P.C.B. existence
Please remove the P.C.B. on the NL conveyor.
010f03 P.C.B. existence
Please remove the P.C.B. on the NA conveyor.
010f04 P.C.B. existence
Please remove the P.C.B. on the NB conveyor.
010f05
P.C.B. existence
Please remove the P.C.B. on the NC conveyor.
010f06
P.C.B. existence
Please remove the P.C.B. on the NR conveyor
010f07 P.C.B. existence
There is no P
.C.B. on the NL conveyor.
010f08 P.C.B. existence
There is no P
.C.B. on the NA conveyor.
010f09 P
.C.B. existence
There is no P.C.B. on the NB conveyor.
010f0a P
.C.B. existence
There is no P.C.B. on the NC conveyor.
010f0b
P.C.B. existence
There is no P.C.B. on the NR conveyor.
010f10 P
.C.B. existence
Please remove the P.C.B of stage 1.
010f11 P.C.B. existence
Please remove the P
.C.B of stage 2.
010f12 P.C.B. existence
The P.C.B is taken into the positioned place of stage 1.
010f13
P.C.B. existence
The P.C.B is taken into the positioned place of stage 2.
010f14 P
.C.B. existence
Please remove the P.C.B of the inlet of input buffer cnvr.
010f15
P.C.B. existence
Please remove the P.C.B of the positioning 1conveyor.
010f16 P.C.B. existence
Please remove the P.C.B of the central conveyor
.
010f17 P.C.B. existence
Please remove the P
.C.B of the positioning 2 conveyor.
010f18 P
.C.B. existence
Please remove the P.C.B of inlet and outlet of output cnvr.
010f19 P.C.B. existence
There is no P
.C.B on the inlet of input buffer conveyer.
010f20 P
.C.B. existence
There is no P.C.B on the positioning 1conveyor.
2-60707-001
2.2 List of Warning Messages
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
010f21 P.C.B. existence
There is no P.C.B on the central conveyor.
010f22 P.C.B. existence
There is no P.C.B on the positioning 2conveyor.
010f23 P.C.B. existence
There is no P.C.B on the inlet and outlet of output cnvr.
010f24 P.C.B. existence
There is no P.C.B that can be transported.
010f25 P.C.B. existence
Two P
.C.Bs were detected on the supply conveyor. Please remove the P.C.B of the
conveyor entrance.
010f26 P
.C.B. existence
Two P.C.Bs were detected on the output conveyor. Please remove the P
.C.B on the
conveyor.
010f27 P.C.B. existence
The P
.C.B was detected on the inlet of input buffer. Please remove the P
.C.B.
010f28 P.C.B. existence
The P.C.B was detected on the positioning 1conveyor. Please remove the P.C.B.
010f29
P.C.B. existence
The P.C.B was detected on thecentral conveyor. Please remove the P.C.B.
010f30 P.C.B. existence
The P
.C.B was detected on thepositioning 2conveyor. Please remove the P.C.B.
010f31 P.C.B. existence
The P.C.B was detected on the output conveyor Please remove the P
.C.B.
010f32 P.C.B. existence
There are no P.C.B to finish at the same time. Please remove all P
.C.B in a
positioning position whether you install a there.
010f33 P.C.B. existence
A P.C.B to fi
nish at the same time is not prepared on positioning 1 conveyer. Please
remove all P.C.B whether to be put.
010f34 P.C.B. existence
A
P.C.B to finish at the same time is not prepared on central conveyer. Please
remove all P
.C.B whether to be put.
010f35 P.C.B. existence
A P.C.B to fi
nish at the same time is not prepared on positioning 2 conveyer. Please
remove all P.C.B whether to be put.
010f36 P.C.B. existence
A P.C.B was detected at the inlet of the input buf
fer conveyor. Please remove it.
010f37 P.C.B. existence
A P.C.B. was detected at the inlet of the output buffer conveyor
. Please remove it.
010f38 P.C.B. existence
A P.C.B was detected at the outlet of the input buffer conveyor. Please remove it.
010f39
P.C.B. existence
A P.C.B. was detected at the outlet of the output buffer conveyor. Please remove it.