4OM-1429-008_w.pdf - 第155页
2-22 0707-001 3.2 List of Machine Information Machine Information Codes Display Field A (Scope of Machine Information) Display Field B (Details of Machine Information) 803001 F AN Stop W arning The ceiling cooling fan st…
2-210707-001
3.2 List of Machine Information
Machine
Information Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
801d01 Semi-auto(continue) start mode auto change
Production operation was interrupted for the state where PCB before component
are placed exists on XY table.
801e01 Placement Level Data
Calculated data out of range. Please check library data and pattern program data.
801f01 Warm start mode auto change
Operation was
can
celed for the state where the P.C.B. in the middle of component
placing is on X/Y table.
802001 Alarm for Splicing
Few components to feed. Please prepare Splicing.
802101 Feeder Maintenance Warning
The total number of feeder's shots reached a previous notice setting number.
802102 Feeder Maintenance Warning
The feeder adsorption rate decreased and exceeded the previous notice setting
number.
2-220707-001
3.2 List of Machine Information
Machine
Information Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
803001 FAN Stop Warning
The ceiling cooling fan stopped.
803002 FAN Stop Warning
The lower mount (left fornt) cooling fan stopped.(M105)
803003 FAN Stop Warning
The lower mount (left rear) cooling fan stopped.(M106)
803004 FAN Stop Warning
The upper mount (left front) cooling fan stopped.(M107)
803005 FAN Stop W
arning
The upper mount (left rear) cooling fan stopped.(M108)
803006 FAN Stop Warning
The lower mount side (left front) cooling fan stopped.(M109)
80300
7 FAN Stop Warning
The lower mount side (left rear) cooling fan stopped.(M1
10)
803008 FAN Stop W
arning
The CPU2 control box (left) cooling fan stopped.(M111)
803009
FAN Stop Warning
Fan stop detection satellite [STLT_F
AN_MON] It does not answer. A fan stop is
normally undetectable.
80300a
FAN Stop Warning
The conveyor multi-axis amplifier (left) cooling fan stopped.(M122)
80300b
FAN Stop Warning
The lower mount side (right front) cooling fan stopped.(M116)
80300c F
AN Stop Warning
The lower mount side (right rear) cooling fan stopped.(M117)
80300d FAN Stop Warning
The recognition BOX cooling fan stopped.(M1
18)
80300e FAN Stop Warning
The electrical system box power supply cooling fan (left) stopped.(M119)
80300f
FAN Stop Warning
The electrical system box power supply cooling fan (right) stopped.(M120)
803010 F
AN Stop Warning
The ceiling (left front) cooling fan stopped.(M102)
803011 F
AN Stop Warning
The ceiling (left rear) cooling fan stopped.(M101)
803012 FAN Stop W
arning
The ceiling (right front) cooling fan stopped.(M104)
803013 FAN Stop W
arning
The ceiling (right rear) cooling fan stopped.(M103)
803014 F
AN Stop Warning
The lower mount (right fornt) cooling fan stopped.(M112)
803015 FAN Stop W
arning
The lower mount (right rear) cooling fan stopped.(M113)
2-230712-002
3.2 List of Machine Information
Machine
Information Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
803016 FAN Stop Warning
The upper mount (right front) cooling fan stopped.(M114)
803017 FAN Stop Warning
The upper mount (right rear) cooling fan stopped.(M115)
803018 FAN Stop Warning
The CPU2 control box (right) cooling fan stopped.(M118)
803019 FAN Stop Warning
The conveyor multi-axis amplifier (right) cooling fan stopped.(M124)
8030
1a FAN Stop Warning
The ceiling (rear) cooling fan stopped.(M101)
80301b
FAN Stop Warning
The ceiling (front) cooling fan stopped.(M102)
80301c F
AN Stop Warning
The electrical system box power supply cooling fan (left) stopped.(M121)
80301d FAN Stop W
arning
The electrical system box power supply cooling fan (right) stopped.(M123)
80301e FAN Stop Warning
The conveyor multi-axis amplifi
er cooling fan stopped.(M112)
804001 Warning of Specifi
ed Test Mode
"Enable" is set for the [Backup Base Axis
Aging] in the Test Mode. Be sure to
check that there is no backup pin and jig under the chute because the backup
base will move up and down.
809001 Internal Exception Notice
CPU2 V
ector 0 exception has been disregarded.
809002 Internal Exception Notice
CPU2 spurious exception has been disregarded.
809003 Internal Exception Notice
CPU2 undefined exception has been disregarded.
809004
Internal Exception Notice
CPU3 undefined exception has been disregarded.
809005 Internal Exception Notice
EB005 SYSFAIL
exception has been disregarded.
809101 Cutting tape Preliminary announcement
Please cut a tape in a predetermined position.
809201 Library tape width check
The tape width in library and the feeder are not in agreement. Please check the
library and feeder.