4OM-1429-008_w.pdf - 第165页
3-4 0707-001 3. Error IDs and Remedial Procedures Erroe ID Error Name, Description, Cause, and Remedy 400302 B Beam Power Shutoff ----- 400303 B Beam Power Shutoff ----- 400401 Interlock Error The [emergency stop] switch…
3-3
3. Error IDs and Remedial Procedures
3.1 Safety Devices
Table 4C3
Erroe ID Error Name, Description, Cause, and Remedy
400101 Load Power Shutoff
The [emergency stop] switch was pressed. (Please confirm the nozzle has not
fallen when you push the beam by the hand.)
Please switch on a power supply after canceling an emergency stop switch and
screen return to normal display.
400102 Load Power Shutoff
Lowered air pressure is detected. [K6]
-----
400103 Load Power Shutoff
Circuit protector is active.
-----
400104 Load Power Shutoff
-----
400105 Load Power Shutoff
Load Power is OFF
Please check the safety relay (K15) wiring.
400106 Load Power Shutoff
-----
400107 Load Power Shutoff
Load power-on timeout.
-----
400108 Load Power Shutoff
-----
400201 Beam Power Shutoff
-----
400202 Beam Power Shutoff
Load power-on timeout.
-----
400203 Beam Power Shutoff
-----
400301 B Beam Power Shutoff
-----
0707-001
3. Error IDs and Remedial Procedures
3-40707-001
3. Error IDs and Remedial Procedures
Erroe ID Error Name, Description, Cause, and Remedy
400302 B Beam Power Shutoff
-----
400303 B Beam Power Shutoff
-----
400401 Interlock Error
The [emergency stop] switch was pressed. (Please confirm the nozzle has not
fallen when you push the beam by the hand.)
Please switch on a power supply after canceling an emergency stop switch and
screen return to normal display.
400402 Interlock Error
The safety cover opened. [K4]
Please shut a safety cover and push the [POWER ON] button.
400403 Interlock Error
Safety cover (CV) detected
-----
400404 Interlock Error
The main circuit of the XY Beam (Rear) was broken. [K33]
-----
400405 Interlock Error
The main circuit of the XY Beam (Front) was broken. [K34]
-----
400406 Interlock Error
Head (Rear) nozzle descent was detected. [A-B3101]
Please perform a zeroing.
400407 Interlock Error
Head (Front) nozzle descent was detected. [B-B3101]
Please perform a zeroing.
400408 Interlock Error
Disengaged Latch(Rear) was detected.
-----
400409 Interlock Error
Disengaged Latch(Front) was detected.
-----
40040a Interlock Error
A
wrong setting of the suppressor and a pickup-failed component (Rear) were
detected. [DA-B0510]
Open the safety cover to check the suppressor and remove the failed component
in the pickup operation after that, execute the Warm start.
40040b Interlock Error
A wrong setting of the suppressor and a pickup-failed component (Front) were
detected. [DB-B0510]
Open the safety cover to check the suppressor and remove the failed component
in the pickup operation after that, execute the Warm start.
3-50707-001
3. Error IDs and Remedial Procedures
Erroe ID Error Name, Description, Cause, and Remedy
40040c Interlock Error
The feeder opening sensor (rear) was shaded. [B0512]
Please remove the factor which is shading the feeder opening sensor (rear), and
carry out zero return. (Continue with the warm start)
40040d Interlock Error
The feeder opening sensor (front) was shaded. [B0513]
Please remove the factor which is shading the feeder opening sensor (front), and
carry out zero return. (Continue with the warm start)
40040e Interlock Error
CB Alarm XY(Rear) Detected[Q201,Q221,Q222,Q223]
-----
40040f Interlock Error
CB Alarm XY(Front) Detected[Q201,Q221,Q222,Q223]
-----
400410 Interlock Error
CB Error (Conveyor/Cutter) Detected[Q203]
-----
400411 Interlock Error
CB Alarm(CPU2) Detected[Q214]
-----
400412 Interlock Error
CB Alarm(DC24) Detected[Q206]
-----
400413 Interlock Error
Lowered air pressure was detected. [K6]
-----
400414
Interlock Error
CB Alarm(Vacuum Pump)[Q205]
-----
400415 Interlock Error
The urgent stop reserve input was input.
Turn off the machine by pressing the emergency stop and after restarting it,
perform the zeroing operation.
400416 Interlock Error
NL axis(Front) Interlock Detected. Please confirm the nozzle has not fallen when
you push the beam by the hand.
Please perform a zeroing.
400417 Interlock Error
NL axis(Rear) Interlock Detected. Please confirm the nozzle has not fallen when
you push the beam by the hand.
Please perform a zeroing.
400418 Interlock Error
L1 axis(Front) Interlock Detected. Please confirm the nozzle has not fallen when
you push the beam by the hand.
Confirm of Path line/Head excess pushing detection.