4OM-1429-008_w.pdf - 第205页
3-44 3.7 Automatic Setup 0712-002 Erroe ID Error Name, Description, Cause, and Remedy 496606 Conveyor Width Automatic Setup (Input conveyor W2) V oltage reduction on the power source was detected. Check the transfer driv…
3-43
3.7 Automatic Setup
0712-002
Erroe ID Error Name, Description, Cause, and Remedy
496407 Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496408 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496501 Conveyor Width Automatic Setup (Input conveyor W2)
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496502 Conveyor Width Automatic Setup (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496503 Conveyor Width Automatic Setup (Input conveyor W2)
An alarm for the interference is occurring.
-----
496504 Conveyor Width Automatic Setup (Input conveyor W2)
DI was detected.
-----
496505 Conveyor Width
Automatic Setup (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496506 Conveyor Width
Automatic Setup (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
496507
Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496508 Conveyor Width
Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496601 Conveyor Width Automatic Setup (Input conveyor W2)
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496602 Conveyor Width Automatic Setup (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496603
Conveyor Width Automatic Setup (Input conveyor W2)
An alarm for the interference is occurring.
-----
496604 Conveyor Width
Automatic Setup (Input conveyor W2)
DI was detected.
-----
496605 Conveyor Width Automatic Setup (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
3-44
3.7 Automatic Setup
0712-002
Erroe ID Error Name, Description, Cause, and Remedy
496606 Conveyor Width Automatic Setup (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
496607 Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496608 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496717 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496718 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496727 Conveyor Width
Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496728 Conveyor Width
Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496737
Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496738 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
4967
47 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
4967
48 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496757
Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
496758 Conveyor Width
Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
496767 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor
.
496768 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
3-45
Erroe ID Error Name, Description, Cause, and Remedy
496801 Conveyor Width Automatic Setup (Input conveyor W2)
An error occurred in the transfer driver comunications.
(1) Check the communication cable. (2) Check the power cable.
496802
-----
496803
-----
496804
-----
3.7
Automatic Setup
0712-002