4OM-1429-008_w.pdf - 第207页
3-46 3.8 Head-Related Errors 0707-001 3.8 Head-Related Errors T able 4C9-1 Erroe ID Error Name, Description, Cause, and Remedy 4A0101 Head Zero Return NL axis zeroing Error . Please confirm the nozzle has not fallen when …
3-45
Erroe ID Error Name, Description, Cause, and Remedy
496801 Conveyor Width Automatic Setup (Input conveyor W2)
An error occurred in the transfer driver comunications.
(1) Check the communication cable. (2) Check the power cable.
496802
-----
496803
-----
496804
-----
3.7
Automatic Setup
0712-002
3-46
3.8 Head-Related Errors
0707-001
3.8 Head-Related Errors
Table 4C9-1
Erroe ID Error Name, Description, Cause, and Remedy
4A0101 Head Zero Return
NL axis zeroing Error. Please confirm the nozzle has not fallen when
you push the
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stop button. (Please confirm the nozzle has not fallen when you push the beam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0102 Head Zero Return
HL axis zeroing Error. Please confirm the nozzle has not
fallen when
you push the
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stop button. (Please confirm the nozzle has not fallen when you push the beam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0103 Head Zero Return
L1 axis zeroing Error. Please confirm the nozzle has not fallen when you push the
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stop button. (Please confirm the nozzle has not fallen when you push the beam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0104 Head Zero Return
L2 axis zeroing Error. Please confirm the nozzle has not fallen when you push the
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stop button. (Please confirm the nozzle has not fallen when you push the beam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0105 Head Zero Return
L3 axis zeroing Error. Please confirm the nozzle has not fallen when you push the
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stop button. (Please confirm the nozzle has not fallen when you push the beam
by the hand.) Please check error on a "MAINT-DVC CHK- MOT
OR" screen.
3-47
3.9 Others
0707-001
3.9 Others
Table 4C10
Erroe ID Error Name, Description, Cause, and Remedy
4b0101 Head Mis-Pickup Detection
Auto Run can't be performed with the Mis-Pickup Component on the head.
Please perform abandonment operation from a control menu.
4b0201 Feeder communication Error.
Communication with the feeder has error.
Please check the number of component remain.
4b0202 Feeder communication Error.
Communication with the feeder has error.(System error)
-----
4b0203 Feeder communication Error.
Feeder Alarm. Please confirm the feeder and the component.
-----
4b0204 Feeder communication Error.
Communi
cat
ion
wit
h feeder was not completed within predetermined time. (Please
take out and insert feeder.)
-----
4b0301 Feeder Base
The feeder base detection was interrupted while the cutter was working.
[B0910,B0911]
-----
4b0302 Feeder Base
The feeder unclamp operation was not completed within predetermined time.
-----
4b0303 Feeder Base
Feeder operation errors
Please check after removing feeder in case using tape feeder. Please check part
of supply in case using tray.
4b0304 Feeder Base
The feeder clamp operation was not completed within predetermined time.
-----
4b0305 Feeder Base
The feeder base ascent operation was not completed within predetermined time.
Check the feeder base upper limit position.
4b0306 Feeder Base
The feeder base descent operation was not completed within predetermined time.
Check the feeder base lower limit position.
4b0307 Feeder Base
The connector (rear side) for the feeder base worked of
f. Do not remove the
connector during feeder base ascent.[B0916]
Connect the connector (rear) for the feeder base to the machine main body.