4OM-1429-008_w.pdf - 第139页
2-6 0707-001 2.2 List of W arning Messages W arning Codes Display Field A (Scope of W arning Messages) Display Field B (Details of W arning Messages) 010f21 P .C.B. existence There is no P .C.B on the central conveyor . …
2-50707-001
2.2 List of Warning Messages
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
010f01 P.C.B. existence
Please remove the P.C.B. on the conveyor.
010f02 P.C.B. existence
Please remove the P.C.B. on the NL conveyor.
010f03 P.C.B. existence
Please remove the P.C.B. on the NA conveyor.
010f04 P.C.B. existence
Please remove the P.C.B. on the NB conveyor.
010f05
P.C.B. existence
Please remove the P.C.B. on the NC conveyor.
010f06
P.C.B. existence
Please remove the P.C.B. on the NR conveyor
010f07 P.C.B. existence
There is no P
.C.B. on the NL conveyor.
010f08 P.C.B. existence
There is no P
.C.B. on the NA conveyor.
010f09 P
.C.B. existence
There is no P.C.B. on the NB conveyor.
010f0a P
.C.B. existence
There is no P.C.B. on the NC conveyor.
010f0b
P.C.B. existence
There is no P.C.B. on the NR conveyor.
010f10 P
.C.B. existence
Please remove the P.C.B of stage 1.
010f11 P.C.B. existence
Please remove the P
.C.B of stage 2.
010f12 P.C.B. existence
The P.C.B is taken into the positioned place of stage 1.
010f13
P.C.B. existence
The P.C.B is taken into the positioned place of stage 2.
010f14 P
.C.B. existence
Please remove the P.C.B of the inlet of input buffer cnvr.
010f15
P.C.B. existence
Please remove the P.C.B of the positioning 1conveyor.
010f16 P.C.B. existence
Please remove the P.C.B of the central conveyor
.
010f17 P.C.B. existence
Please remove the P
.C.B of the positioning 2 conveyor.
010f18 P
.C.B. existence
Please remove the P.C.B of inlet and outlet of output cnvr.
010f19 P.C.B. existence
There is no P
.C.B on the inlet of input buffer conveyer.
010f20 P
.C.B. existence
There is no P.C.B on the positioning 1conveyor.
2-60707-001
2.2 List of Warning Messages
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
010f21 P.C.B. existence
There is no P.C.B on the central conveyor.
010f22 P.C.B. existence
There is no P.C.B on the positioning 2conveyor.
010f23 P.C.B. existence
There is no P.C.B on the inlet and outlet of output cnvr.
010f24 P.C.B. existence
There is no P.C.B that can be transported.
010f25 P.C.B. existence
Two P
.C.Bs were detected on the supply conveyor. Please remove the P.C.B of the
conveyor entrance.
010f26 P
.C.B. existence
Two P.C.Bs were detected on the output conveyor. Please remove the P
.C.B on the
conveyor.
010f27 P.C.B. existence
The P
.C.B was detected on the inlet of input buffer. Please remove the P
.C.B.
010f28 P.C.B. existence
The P.C.B was detected on the positioning 1conveyor. Please remove the P.C.B.
010f29
P.C.B. existence
The P.C.B was detected on thecentral conveyor. Please remove the P.C.B.
010f30 P.C.B. existence
The P
.C.B was detected on thepositioning 2conveyor. Please remove the P.C.B.
010f31 P.C.B. existence
The P.C.B was detected on the output conveyor Please remove the P
.C.B.
010f32 P.C.B. existence
There are no P.C.B to finish at the same time. Please remove all P
.C.B in a
positioning position whether you install a there.
010f33 P.C.B. existence
A P.C.B to fi
nish at the same time is not prepared on positioning 1 conveyer. Please
remove all P.C.B whether to be put.
010f34 P.C.B. existence
A
P.C.B to finish at the same time is not prepared on central conveyer. Please
remove all P
.C.B whether to be put.
010f35 P.C.B. existence
A P.C.B to fi
nish at the same time is not prepared on positioning 2 conveyer. Please
remove all P.C.B whether to be put.
010f36 P.C.B. existence
A P.C.B was detected at the inlet of the input buf
fer conveyor. Please remove it.
010f37 P.C.B. existence
A P.C.B. was detected at the inlet of the output buffer conveyor
. Please remove it.
010f38 P.C.B. existence
A P.C.B was detected at the outlet of the input buffer conveyor. Please remove it.
010f39
P.C.B. existence
A P.C.B. was detected at the outlet of the output buffer conveyor. Please remove it.
2-70712-002
2.2 List of Warning Messages
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
011001 Empty Feeder (rear)
Please set the feeder (rear) that used by the pattern program.
011002 Empty Feeder (rear)
-----
011101 Empty Feeder (front)
Please set the feeder (front) that used by the pattern program.
011102 Empty Feeder (front)
-----
011201 Transfer main circuit
Press [POWER ON] button to activate Load Power circuit.
011202 Transfer main circuit
Press [POWER ON] button to activate Load Power circuit.
011301 Transfer main circuit (backup, width setup)
Press [POWER ON] button to activate Load Power circuit.
011302 T
ransfer main circuit (backup, width setup)
Press [POWER ON] button to activate Load Power circuit.
011401 Zeroing not finish
Perform
All zeroing
011501 Feeder communication not fi
nish (rear)
Please wait for a while.
011601 Feeder communication not fi
nish (front)
Please wait for a while.
011701 P
.C.B. position
Please position the P.C.B.
011702
P.C.B. position
Please locate the P.C.B in positioning 1.
01
1703 P.C.B. position
Please locate the P.C.B in positioning 2.
011704 P
.C.B. position
Please position the P.C.B of stage 2 in positioning 1.
011705
P.C.B. position
Please position the P.C.B of stage 1 in positioning 2.
011706 P.C.B. position
There is no P.C.B. in the setting position.
011801 Data transfer not finish
It cann't start because data is not set properly.
011901 Head unsettled comp. confirmation
An unsettled component was detected. Please discard the component. In case of
the "Pauses" condition, perform the operation for interruption.
01
1a01 Nozzle stocker lower limit confirmation
Please perform All zeroing.
011b01 NL axis zero confirmation
Please perform All zeroing.